Tamiya TRF419
#3737
Definitely. 419 is uncomparable with 419x/ws/xr.....
Go for the most recent car as early as you can.
Go for the most recent car as early as you can.
#3738
+1
#3739
FYI
http://www.thercracer.com/2018/02/marton-toth-mibosport-cup-r5-race.html?m=0
http://www.thercracer.com/2018/02/marton-toth-mibosport-cup-r5-race.html?m=0
#3740
TRF419XR Spare parts
#3741
Anyone gotten their hands on a 419XR yet?
#3742
Tech Champion
iTrader: (94)
I have the XR conversion and updated my car with the front and rear bulkheads and servo mount on the WS Aluminium chassis. I did not install the motor mount, since the WS chassis does not have the additional optional holes.. (although I know it would work)
I raced the car that weekend in USGT at our club race and placed 1st, out of a field of 9.. my first 1st place win in a full field.. so I was very happy. I can’t say I noticed much difference as a result of the bulkheads and sway bars.. but they are nice to have.
The biggest change for me was when I changed to the WS chassis.. my 419 became a formidable machine
I raced the car that weekend in USGT at our club race and placed 1st, out of a field of 9.. my first 1st place win in a full field.. so I was very happy. I can’t say I noticed much difference as a result of the bulkheads and sway bars.. but they are nice to have.
The biggest change for me was when I changed to the WS chassis.. my 419 became a formidable machine
#3743
Tech Adept
I am in the middle of doing conversion from X to XR. New motor mount and pulley is better -> less wobble, bigger bearing. It is also worth to mention that manual shows to mount diff and spool in lower position - opposite to the original 419x manual.
Next week local racing meeting so I will report how it will perform.
Next week local racing meeting so I will report how it will perform.
#3745
Tech Regular
Guys can somebody help me getting my fdr to 5.
I'm going to give blinky racing a try but am unsure what pinion spur combo will fit.
I want to run 64dp
I was hoping to run a
108 spur and 40 pinion bit not sure if itl fit.
Car is a 419
I'm going to give blinky racing a try but am unsure what pinion spur combo will fit.
I want to run 64dp
I was hoping to run a
108 spur and 40 pinion bit not sure if itl fit.
Car is a 419
Last edited by hipwell; 03-04-2018 at 02:51 PM.
#3746
Tech Regular
Will 108 and 40 fit?
#3747
running a 102t spur and 53t pinion (64p) giving me just a hair above 3.5fdr in my 419x
#3748
Hy. 111/41. Thats my combo for 5.0 FDR
#3749
Tech Regular
#3750