bestindebt

I just want to take the time to congratulate all the Serpent guys on a good showing in Vegas. Chris' car looked good in the main.He also took the time to help everyone at the race with a Serpent car. I think he was in pit lane more than in the pits. As for me my car, it was really good. As a sportsman driver, its the best I have ever done in Vegas.

captian

that right chris!!!! garen is running the 960 i forgot way to go garen for making the A main did paul run his 960 too!!! i hear he fast with his 960 too!!! and steve good showing with the 960.

Doug M

Chris, congratulations on your podium finish at Las Vegas with your 960!!!!!! I hear your chassis was really good. You seem to be getting real comfortable with the car, engine and tire package. Was there anything unusual that you needed to change as far as set-up goes? Wow, I even heard you were walking around the pits trying to help anyone with yellow wheels. You are the man!!!!!!! Thanks for all the help and advice you have been giving everyone.

Garen you did very well also!! Too bad you got bit by the Qualifying Points myth.

C Verano

iTrader: (1)

Thanks Doug.

The car worked very well.I am getting very comfortable with the car. In qualifying I ran the car the same way as I ran it here at Crystal Park with a small caster adjustment. For the main I changed the lower rear roll center just in case the wind and dust became a problem.

As far as helping everyone, I tried to get to everyone that needed help. My car was good enough so it allowed me to help people with their 960's and even with my cousin's 710's. I was lucky to have Bryon and Ryan there to help with cutting tires. My cousins Jeremy and Jeremy (the painter) took care of cleaning the car. Thanks guys. Overall everyone seemed to be happy with the way their 960's were working. It was just a matter of helping them with small adjustments.

Ian C

Hi, has anyone got a rollout chart for the 960?
Or do you know if it woud be the same as the one for the vector/veteq? (i cant remeber if all the pulleys are the same..)

PMSorber

I have an electronic version in Excel, you only have to fill-in the pulley's.
Just PM me.

C Verano

iTrader: (1)

For everyone that wanted a transponder mount for their 960..Here it is.


http://www.mytsn.com/products/imggal.asp?prid=4273#imgs

captian

looks nice

M7H

I rather have my transponder mounted as far as possible on the frontside of the car, just in case of a "photo finish".....

PMSorber

Like our car

M7H

Maybe I even will try to get my transponder 1 meter in front of the car, with a stick or so.....

captian

nefastseven

here is mine,i made it with an aluminium plate,i drilled a hole(3mm) to fix it on the Steering Servo mount and another(7mm) to fix the transponder

PMSorber

Even that will not help Martin

nefastseven

tomorrow we have in france the serpent days(serpent tour) at the Carole track
steven cuypers,franck bestel(team RB french) ,alain robuchon(team rb french) and richard keur the boss of serpent will be there

i hope we'll learn a lot of thing with centax,chassis and engine set up