Kyosho v-one rrr
#6226
Originally Posted by performula
This is hilarious...the day I receive my WCE the nightmare thread I have been fearing: V-One-RRR Evo
Technology at its finest.
Technology at its finest.
#6227
Tech Elite
iTrader: (15)
bad experience - kfactory hardened pinions
hey team
i had a bad experience with the kfactory hardened pinions yesterday. i was only doing short bursts of throttle running in an engine in the street.
when i started to hear a clicking soundcoming form the gearbox. i found that the first gear pinion had cracked apart in between 2 teeth.
i had a bad experience with the kfactory hardened pinions yesterday. i was only doing short bursts of throttle running in an engine in the street.
when i started to hear a clicking soundcoming form the gearbox. i found that the first gear pinion had cracked apart in between 2 teeth.
#6228
Originally Posted by mrgsr
hey team
i had a bad experience with the kfactory hardened pinions yesterday. i was only doing short bursts of throttle running in an engine in the street.
when i started to hear a clicking soundcoming form the gearbox. i found that the first gear pinion had cracked apart in between 2 teeth.
i had a bad experience with the kfactory hardened pinions yesterday. i was only doing short bursts of throttle running in an engine in the street.
when i started to hear a clicking soundcoming form the gearbox. i found that the first gear pinion had cracked apart in between 2 teeth.
This is the product page for 16T gears:
http://www.kfactoryracing.com/produc...1915&pageNum=2
Here is the contact page, which including email address for service.
http://www.kfactoryracing.com/contactsus.jsp
#6230
Originally Posted by performula
Is the 3mm 3Racing chassis the same as the stock chassis? Is one lighter than other? 3R have an advantage over the stock chassis?
Picture: http://rc-mushroom.com/product_info....oducts_id=7284
#6232
Tech Fanatic
iTrader: (1)
Join Date: May 2003
Location: Was in Toledo, OH now Battle Ground, WA
Posts: 833
Trader Rating: 1 (100%+)
I have one on it's way, I hope , and can't wait to get it installed and try it out. Since I run on a track that can get totally insane traction, I think it should be nice.
Last edited by mcsquish; 04-30-2006 at 07:48 AM.
#6233
Originally Posted by mcsquish
I have one on it's way, I hope , and can't wait to get it installed and try it out.
#6234
Originally Posted by performula
This is hilarious...the day I receive my WCE the nightmare thread I have been fearing: V-One-RRR Evo
Technology at its finest.
Technology at its finest.
#6235
Originally Posted by mrgsr
hey team
i had a bad experience with the kfactory hardened pinions yesterday. i was only doing short bursts of throttle running in an engine in the street.
when i started to hear a clicking soundcoming form the gearbox. i found that the first gear pinion had cracked apart in between 2 teeth.
i had a bad experience with the kfactory hardened pinions yesterday. i was only doing short bursts of throttle running in an engine in the street.
when i started to hear a clicking soundcoming form the gearbox. i found that the first gear pinion had cracked apart in between 2 teeth.
I hope they take care of it for you and maybe you just got a bad one.
#6236
Tech Fanatic
iTrader: (1)
Join Date: May 2003
Location: Was in Toledo, OH now Battle Ground, WA
Posts: 833
Trader Rating: 1 (100%+)
rmdhawaii, I finally got a chance to look at your web page, and it's very nice! You and the others that helped with the info. did a nice job!
#6237
Will the RRR WCE clutch components fit the Mugen MTX-3 Flywheel?
When should you lock the rear differential?
When should you lock the rear differential?
Last edited by performula; 04-30-2006 at 10:39 AM.
#6238
Originally Posted by jag
Mine should be here Monday. I can't wait either.
#6239
Originally Posted by mcsquish
rmdhawaii, I finally got a chance to look at your web page, and it's very nice! You and the others that helped with the info. did a nice job!
#6240
Originally Posted by rmdhawaii
UE! Let me know!
Actually Robert already said it's good so I know it is.