Team Corally RDX Touring Car
04-05-2005, 06:01 PM
#1622
Re: Ball Ends Replacement?
Originally posted by danjoy25
Would the RPM 4-40 ball end fit better than standard Corally ones?
Would the RPM 4-40 ball end fit better than standard Corally ones?
In hindsight, I'll probably just order some spare Corally ball ends, as they work just fine.
I did outfit it with some Lundford hotness though, which is about 8000 times nicer to work with than those goofy rods it comes with.
04-05-2005, 06:02 PM
#1623
I turned 12.5 lap time!!
3 tenths off track record 1st time running mod! during my 1st qualifier which was 2 laps faster than my mod time with my Losi!
can you say holy Smoke!
Each time I run this car it gets better..!
The RDX is stuck like velcro in the truns and ripps off the corners.
Thats with a diff on carpet w foams.I used the same setup in stock except with stock motor and rubber tires.. finished second in the a main.
aka Badboy tsuruda
3 tenths off track record 1st time running mod! during my 1st qualifier which was 2 laps faster than my mod time with my Losi!
can you say holy Smoke!
Each time I run this car it gets better..!
The RDX is stuck like velcro in the truns and ripps off the corners.
Thats with a diff on carpet w foams.I used the same setup in stock except with stock motor and rubber tires.. finished second in the a main.
aka Badboy tsuruda
04-05-2005, 06:05 PM
#1624
TSK TSK. It is obvious that if you put 30 RDX's in a race with only 31 cars that the ods are hmmm lets see 30 to 1 that an RDX will win so there is not much to brag about there.
Now if you really want to impress me let me see how this so called race dominator does one on one with lets say an MI2 ;-)
Right STLNLST. LOL
Now if you really want to impress me let me see how this so called race dominator does one on one with lets say an MI2 ;-)
Right STLNLST. LOL
04-05-2005, 06:40 PM
#1628
mi2 huh?
The last two weeks i have been the only RDX in 19 turn ... I tq'ed and one both ...........even steve can drive an rdx..
04-05-2005, 08:55 PM
#1630
Getting a RDX soon. Loved my Assasin, so this should just be an evolution. Any recommendations when building the car?
04-05-2005, 08:56 PM
#1631
Tech Elite
iTrader: (4)
Join Date: Jun 2002
Location: RUBBERNECK RACING Columbus, Ohio
Posts: 2,484
Trader Rating: 4 (100%+)
Originally posted by BadBoyRC
girls from de islands..
girls from de islands..
04-05-2005, 09:02 PM
#1632
Any recommendations when building the car?
Build it using blue locktite metal to metal.
d/l a setup from the corally site and follow it.
seal the graphite w CA (edges)
add weight (car builds light) with electrics so you have 55% weight on the rear and 45% on front
d/l a setup from the corally site and follow it.
seal the graphite w CA (edges)
add weight (car builds light) with electrics so you have 55% weight on the rear and 45% on front
04-05-2005, 09:13 PM
#1633
Thanks. Are Toso's set ups posted and current?