CapricornRC - Present and Active
06-03-2009, 12:43 AM
#1
CapricornRC - Present and Active
The present post to calm down all the rumors about the lack of news about our company.
We are still working very hard to several products, engines and our 1/10 models.
The presence here on RCTECH was delegated to our distributor and pilots manager with whom we had some disagrement and problems to have back all the material gave THEM for our USA official drivers (engines and parts).
Actually we are working to find parthners who will work following our own business line.
All items previously sold from our USA distributor are always available on our website www.capricornrc.com and will be applied on all the USA orders a 25% discount on official price in order to compensate the lack of a distributor.
We will soon post the on road test drive of our 1/10 model as well as the new Q12E / ET engine.
Info and problems can always be forwarded to our email [email protected]
Thank's a lot to all our supporters, clients.. and future users.
Capricorn RC
We are still working very hard to several products, engines and our 1/10 models.
The presence here on RCTECH was delegated to our distributor and pilots manager with whom we had some disagrement and problems to have back all the material gave THEM for our USA official drivers (engines and parts).
Actually we are working to find parthners who will work following our own business line.
All items previously sold from our USA distributor are always available on our website www.capricornrc.com and will be applied on all the USA orders a 25% discount on official price in order to compensate the lack of a distributor.
We will soon post the on road test drive of our 1/10 model as well as the new Q12E / ET engine.
Info and problems can always be forwarded to our email [email protected]
Thank's a lot to all our supporters, clients.. and future users.
Capricorn RC
Last edited by CapricornRC; 06-03-2009 at 01:18 AM.
06-03-2009, 12:49 AM
#2
Tech Initiate
Any news about your 1/8 electric conversion for Serpent 960?
Last edited by Oblivionixx; 06-03-2009 at 02:11 AM.
06-03-2009, 03:47 AM
#4
I recently made an order @ the Capricorn site, will the 25% still apply to me? I haven't been able to race in almost 2 months. I love my CL12 and I'm not giving up on it.
06-03-2009, 01:28 PM
#6
Hi
Iīm curios about your 12 ETX engine.
I just wonder, what is the base for this engine ? is it from sirio ? og have you developed the whole engine by yourself ?
What nitro percent are the engine shimmed for ?
What is good engine temperature in degrees ?
Pipe, which pipe are prefered ?
Lotīs of questions.....
THX
Iīm curios about your 12 ETX engine.
I just wonder, what is the base for this engine ? is it from sirio ? og have you developed the whole engine by yourself ?
What nitro percent are the engine shimmed for ?
What is good engine temperature in degrees ?
Pipe, which pipe are prefered ?
Lotīs of questions.....
THX
06-03-2009, 02:46 PM
#7
The present post to calm down all the rumors about the lack of news about our company.
We are still working very hard to several products, engines and our 1/10 models.
The presence here on RCTECH was delegated to our distributor and pilots manager with whom we had some disagrement and problems to have back all the material gave THEM for our USA official drivers (engines and parts).
Actually we are working to find parthners who will work following our own business line.
All items previously sold from our USA distributor are always available on our website www.capricornrc.com and will be applied on all the USA orders a 25% discount on official price in order to compensate the lack of a distributor.
We will soon post the on road test drive of our 1/10 model as well as the new Q12E / ET engine.
Info and problems can always be forwarded to our email [email protected]
Thank's a lot to all our supporters, clients.. and future users.
Capricorn RC
We are still working very hard to several products, engines and our 1/10 models.
The presence here on RCTECH was delegated to our distributor and pilots manager with whom we had some disagrement and problems to have back all the material gave THEM for our USA official drivers (engines and parts).
Actually we are working to find parthners who will work following our own business line.
All items previously sold from our USA distributor are always available on our website www.capricornrc.com and will be applied on all the USA orders a 25% discount on official price in order to compensate the lack of a distributor.
We will soon post the on road test drive of our 1/10 model as well as the new Q12E / ET engine.
Info and problems can always be forwarded to our email [email protected]
Thank's a lot to all our supporters, clients.. and future users.
Capricorn RC
I have dealt with Uriah for several years and once with you, which was more than enough!
Good luck finding someone who's willing to adopt your business ethics.....
06-03-2009, 11:15 PM
#8
Tech Regular
Hi
Iīm curios about your 12 ETX engine.
I just wonder, what is the base for this engine ? is it from sirio ? og have you developed the whole engine by yourself ?
What nitro percent are the engine shimmed for ?
What is good engine temperature in degrees ?
Pipe, which pipe are prefered ?
Lotīs of questions.....
THX
Iīm curios about your 12 ETX engine.
I just wonder, what is the base for this engine ? is it from sirio ? og have you developed the whole engine by yourself ?
What nitro percent are the engine shimmed for ?
What is good engine temperature in degrees ?
Pipe, which pipe are prefered ?
Lotīs of questions.....
THX
06-04-2009, 12:28 AM
#9
Hi
Iīm curios about your 12 ETX engine.
I just wonder, what is the base for this engine ? is it from sirio ? og have you developed the whole engine by yourself ?
What nitro percent are the engine shimmed for ?
What is good engine temperature in degrees ?
Pipe, which pipe are prefered ?
Lotīs of questions.....
THX
Iīm curios about your 12 ETX engine.
I just wonder, what is the base for this engine ? is it from sirio ? og have you developed the whole engine by yourself ?
What nitro percent are the engine shimmed for ?
What is good engine temperature in degrees ?
Pipe, which pipe are prefered ?
Lotīs of questions.....
THX
06-04-2009, 02:46 AM
#10
Iīm curios about your 12 ETX engine.
I just wonder, what is the base for this engine ?
The CL 12 ETX is based on evo4 crackcase
is it from sirio ? or have you developed the whole engine by yourself ?
Production is made by sirio yes.... but all inner part are developed under our own
specification such timing, shimming, crank tuning, underhead... etc
What nitro percent are the engine shimmed for ? the factory shimming is for 16% nitro
What is good engine temperature in degrees ? we suggest to run it between 100/110 not more
Pipe, which pipe are prefered ?
the best pipe for our .12 series engines are Capricorn 2648, Sirio 2611 and RB 2604
Lotīs of questions.....
THX
Thank`s to u
I just wonder, what is the base for this engine ?
The CL 12 ETX is based on evo4 crackcase
is it from sirio ? or have you developed the whole engine by yourself ?
Production is made by sirio yes.... but all inner part are developed under our own
specification such timing, shimming, crank tuning, underhead... etc
What nitro percent are the engine shimmed for ? the factory shimming is for 16% nitro
What is good engine temperature in degrees ? we suggest to run it between 100/110 not more
Pipe, which pipe are prefered ?
the best pipe for our .12 series engines are Capricorn 2648, Sirio 2611 and RB 2604
Lotīs of questions.....
THX
Thank`s to u
06-04-2009, 02:51 AM
#11
Ur words are to the wind because are off topic on our thread.
Hope will be the lasts...
thank`s a lot
06-04-2009, 02:52 AM
#12
06-04-2009, 03:28 AM
#13
We are working to automatize this discount in the e/commerce but not always working.
Keep care of this and anyone will have this discount till a new USA distributor will be operative.
thank`s
06-04-2009, 05:58 AM
#14
To all the people reading this thread about the Capricorn RC company:
First, I have been running a Capricorn CL9TE for months now and it's by far the best and most powerful engine I have ever ran!
Second, I have been dealing directly with Capricorn for a few months as well and have been given great customer service and dedication from the Capricorn RC team. They have been nothing but helpful and professional and a true pleasure to do business with. Shipping is fast and the 25% discount makes up for for the dollar/Euro difference.
Third, what ever is between Murnan and Capricorn, is between Murnan and Capricorn and should not affect anyones views or business with either company. Murnan is a great modder and Capricorn is a great RC Company.
First, I have been running a Capricorn CL9TE for months now and it's by far the best and most powerful engine I have ever ran!
Second, I have been dealing directly with Capricorn for a few months as well and have been given great customer service and dedication from the Capricorn RC team. They have been nothing but helpful and professional and a true pleasure to do business with. Shipping is fast and the 25% discount makes up for for the dollar/Euro difference.
Third, what ever is between Murnan and Capricorn, is between Murnan and Capricorn and should not affect anyones views or business with either company. Murnan is a great modder and Capricorn is a great RC Company.
06-16-2009, 12:02 AM
#15
To all the people reading this thread about the Capricorn RC company:
First, I have been running a Capricorn CL9TE for months now and it's by far the best and most powerful engine I have ever ran!
Second, I have been dealing directly with Capricorn for a few months as well and have been given great customer service and dedication from the Capricorn RC team. They have been nothing but helpful and professional and a true pleasure to do business with. Shipping is fast and the 25% discount makes up for for the dollar/Euro difference.
Third, what ever is between Murnan and Capricorn, is between Murnan and Capricorn and should not affect anyones views or business with either company. Murnan is a great modder and Capricorn is a great RC Company.
First, I have been running a Capricorn CL9TE for months now and it's by far the best and most powerful engine I have ever ran!
Second, I have been dealing directly with Capricorn for a few months as well and have been given great customer service and dedication from the Capricorn RC team. They have been nothing but helpful and professional and a true pleasure to do business with. Shipping is fast and the 25% discount makes up for for the dollar/Euro difference.
Third, what ever is between Murnan and Capricorn, is between Murnan and Capricorn and should not affect anyones views or business with either company. Murnan is a great modder and Capricorn is a great RC Company.
Thank's
Capricorn RC