BMI Racing Discussions
#7021
BMI TC4 Setup with Front dif
I thought I would take out the one-way and put in a dif, does anyone here have a good setup that I can try.
It seems the closest I can get is within .9 of a seccond from my best time with the one-way.
On my BMI TC3 I am faster without the one way on the same track so I figure I should be able to atleast match my time on the TC4 when I remove the one-way.
most people seem to do better without a one-way on this track.
Thanks for the help
It seems the closest I can get is within .9 of a seccond from my best time with the one-way.
On my BMI TC3 I am faster without the one way on the same track so I figure I should be able to atleast match my time on the TC4 when I remove the one-way.
most people seem to do better without a one-way on this track.
Thanks for the help
#7022
SA_racer - ygpm
#7023
Here are some of the BMI driver's results from the state race at Superior Hobbies:
Touring Stock
1st - Mike Abraira aka Team Butter
12th - Tim Kowal
24th - Adam Dipirro
42nd - Tony Munno
19t Touring
3rd - Mike Abraira
7th - Steve McNichols
21st - Greg Hunsinger Jr.
25h - Adam Dipirro
28th - Curtis Book
Sportsman Stock
7th - Vic Kuhn
Touring Mod
1st - Paul Wynn
3rd - Steve McNichols
5th - Troy Schafer
6th - Greg Hunsinger Jr.
12th - Art Jensen
14th- Toni Munno
Good showing everyone
Touring Stock
1st - Mike Abraira aka Team Butter
12th - Tim Kowal
24th - Adam Dipirro
42nd - Tony Munno
19t Touring
3rd - Mike Abraira
7th - Steve McNichols
21st - Greg Hunsinger Jr.
25h - Adam Dipirro
28th - Curtis Book
Sportsman Stock
7th - Vic Kuhn
Touring Mod
1st - Paul Wynn
3rd - Steve McNichols
5th - Troy Schafer
6th - Greg Hunsinger Jr.
12th - Art Jensen
14th- Toni Munno
Good showing everyone
#7024
Jason....
do you have any plans to make a TC4 upper tub deck with this new high strength CF you have on order. IF not, I would like the titanium color one. I have been waiting from months, when will you have them cut out. Thanks...
Last edited by RCknight; 04-28-2005 at 07:01 PM.
#7025
Titanium definately looks the coolest
#7026
Weight difference?
What is the weight difference between the the Associated TC4 Carbon Chasis, and the BMI Chasis?
Where can I get a TC4 BMI Chasis?
Doug
Where can I get a TC4 BMI Chasis?
Doug
#7029
I never did get to weight mine before putting the BMI chassis on but it came up at 55.1 at the state race!! I think I need to put it on a diet. lol. I've still got the steel turnbuckles, motor mounts and mostly plastic parts on the car so I'm sure that adds a bit of weight to it.
#7030
Tech Regular
Originally posted by protc3
.soon to be released is the FK05.i should be posting some pics of the FK05 real soon.i will be finishing the engineering on the chassis kit this week some time.
.soon to be released is the FK05.i should be posting some pics of the FK05 real soon.i will be finishing the engineering on the chassis kit this week some time.
I got my other topplate for my 350 lastweek.
Thanks.
Post some pics ASAP.
#7031
Would be nice to see a Xray05 upper deck....
designed like the RDX. Strait across the whole chassis. The bulk heads should allow for it. Carpet racer.... Then you could get rid of the stand offs. 3mm chassis & upper deck.
Last edited by RCknight; 04-30-2005 at 05:49 PM.
#7032
Jason any plans for a 3mm titanium kit...
for the RDX?
#7034
Jason, did you change much on the....
Xray05 stock chassis? I can't wait to check it out!