Josh Cyrul

iTrader: (1)

DaveW - Naa, I'd rather win on my own with out a "blocker"...lol... As far as the string - it's there - you just have to catch it!!

Kevin - It may work, but does it work the way it's meant to at the speed it should??

trackdesigner71

iTrader: (6)

hey Josh,as grossly shameless as this sounds, do you have any TC3 parts lyin around that you dont need? And on a more serious note, have you seen the 2004 Worlds track and what do you think about your chances?

Mike D

Josh - The attached Excel sheet will calculate and track the movement of the roll center of the 'new style' associated front end as the chassis compresses and/or rolls. The design and physics behind Excel sheet are correct but some assumptions were made by the author to simplify the geometry and there is some calculation round off error. The answers are fairly accurate though...

Mike

SalvadoriRacing

hi josh.....

why did you use stock brushes (fantom 321-s) running touring modified at the brp halloween classic???????

Skip109

Mike, do you have a sheet like that for a tc3

freeman

iTrader: (12)

Hi Josh ,

Just wondering if you have experienced any chassis tweak on the evo2. If I set the ride height at 5mm on front and 6mm on rear. And droop at 3 f+r. The sides of the chassis is different from 6mm on right side and 6.5to 7mm on the left side. Please let me know if there is anything i can do.

Jeff Brown

The 321-S is the laydown version of our low wind motor brush. The K series motors have laydown brushhoods. The S is for stock, only because most Mods have stand up brushes.

Jeff

PizzaDude

Mike D

Do you also have a calculator in mm (metric) please?

DaveW

iTrader: (1)

Josh, i have seen you drive man... trying to catch that string on the back of your car... is like dangling a carrot on the end of a stick in front of a donkeys mouth to motivate him to move... only to laugh as it stays JUST out of reach! And expecting the donkey to be fast about it?!? The difference between that donkey and me? I know i aint ever gonna catch that "carrot".

:note: No sidejokes in reference to "donkey" as an "a$$" or calling me "jack" will be tolerated. Get your own jokes guys!


Sorry, thought i would add a little of my silly humor to the thread this morning!
- Dave

OB42TC3

Josh,

were you running the evo 2 sirio .12 last year, and how much better is the evo 2 than the original?

whynot

iTrader: (18)

Josh



Are you going to the winter nats ? I didnt see your name on the entry list they have posted. Good luck if you are going.I would put my money on you this year

dr_hfuhuhurr

iTrader: (95)

Josh,
The X Ray setup you have posted on mytsn for the Cleveland Champs, does that use the short, or long arms?

https://www.mytsn.com/setups/setup.asp?sid=2187

Also, now that you've been running the XRay for a few weeks, what are you impressions? What sort of things should we expect to see new from XRay?

Blake

JCB

What is the benefits or short arms? I just bought the kit. I assume I'm running the longer arms? Should I change them?

thanks,

Arun

Josh,
Traction rolling has, on occasion, been my achilles (sp?) heel.

Besides CA on the tire's side-wall, what steps do you take (setup-wise) to relieve excessive traction roll?

Specifically, right now, I am running touring on carpet, but I am basically looking for some steps to take if it becomes a problem on any surface.

Intel

Hi Josh,

how do you build your ball diffs, do you do anything special or do you just build it according to the maunal?

thanx

Intel