Alex Racing Barracuda R2 & R3
Tech Master
iTrader: (1)
Originally posted by JDM_DOHC_SiR
You can make a R3 shaft work
-Dave
You can make a R3 shaft work
-Dave
Tech Addict
iTrader: (16)
Ok...didn't know if was still a direct swap... all three of my cudas had the Xenon setup, so I have these two stock shaft setups left over... 403, if you want one, let me know blue or red, and just PP like $8 and your address, and I'll send whichever one you want off... Sounds OK??? If not, let me know...
Thanks!
R
Thanks!
R
Tech Regular
Just a few new pics from me... I doesnīt run my Cuda at the moment but I develop parts all the time...
Here is something new... In my opinion the chassis is not stiff enough... so here we go... tube chassis. Itīs just a prototype of the negative of the real chassis, but it should show my thoughts. Unfortunately it will be very expensive... But if anyone is interested.
Here is something new... In my opinion the chassis is not stiff enough... so here we go... tube chassis. Itīs just a prototype of the negative of the real chassis, but it should show my thoughts. Unfortunately it will be very expensive... But if anyone is interested.
Tech Regular
One more...
Tech Regular
And a last one...
Tech Regular
Oh... and sorry for the chaos on my working place.
Iīm preparing my car for the TCM in Eppelheim this weekend.
Iīm preparing my car for the TCM in Eppelheim this weekend.
Is there a carbon fibre tub chassis for the Barracuda? I believe its been in this forum but can't find it.
Please let me know thanks.
Please let me know thanks.
Tech Regular
Last edited by speedy-932; 04-18-2005 at 10:36 AM.
Tech Champion
iTrader: (31)
Originally posted by speedy-932
Just a few new pics from me... I doesnīt run my Cuda at the moment but I develop parts all the time...
Here is something new... In my opinion the chassis is not stiff enough... so here we go... tube chassis. Itīs just a prototype of the negative of the real chassis, but it should show my thoughts. Unfortunately it will be very expensive... But if anyone is interested.
Just a few new pics from me... I doesnīt run my Cuda at the moment but I develop parts all the time...
Here is something new... In my opinion the chassis is not stiff enough... so here we go... tube chassis. Itīs just a prototype of the negative of the real chassis, but it should show my thoughts. Unfortunately it will be very expensive... But if anyone is interested.
-Dave
Tech Regular
R2... but R3 would be no problem if I had the sizes of the chassis... I thin there are only a few holes different?!
Tech Champion
iTrader: (31)
Originally posted by speedy-932
R2... but R3 would be no problem if I had the sizes of the chassis... I thin there are only a few holes different?!
R2... but R3 would be no problem if I had the sizes of the chassis... I thin there are only a few holes different?!
-Dave
Tech Regular
Did you hacked my PC??? I have designed a prototype of a motor mount which supports the motor mount... all here on my PC... just the money... CNC isnīt cheap.
My thoughts were to give the R2 a similar drivetrain like the R3 and keep the steering. I donīt know whether it will work but I find it interesting.
Chris
My thoughts were to give the R2 a similar drivetrain like the R3 and keep the steering. I donīt know whether it will work but I find it interesting.
Chris
Tech Champion
iTrader: (31)
Originally posted by speedy-932
Did you hacked my PC??? I have designed a prototype of a motor mount which supports the motor mount... all here on my PC... just the money... CNC isnīt cheap.
My thoughts were to give the R2 a similar drivetrain like the R3 and keep the steering. I donīt know whether it will work but I find it interesting.
Chris
Did you hacked my PC??? I have designed a prototype of a motor mount which supports the motor mount... all here on my PC... just the money... CNC isnīt cheap.
My thoughts were to give the R2 a similar drivetrain like the R3 and keep the steering. I donīt know whether it will work but I find it interesting.
Chris
-Dave
Tech Regular
A rough price? Carbon is expensive and itīs all manufactured... Hm... I think around 250$... chassis+drivetrain...
Chris
Chris
Tech Champion
iTrader: (31)
Originally posted by speedy-932
A rough price? Carbon is expensive and itīs all manufactured... Hm... I think around 250$... chassis+drivetrain...
Chris
A rough price? Carbon is expensive and itīs all manufactured... Hm... I think around 250$... chassis+drivetrain...
Chris
-Dave