US Indoor Champs 2006
12-02-2006, 05:56 PM
#1261
Tech Apprentice
Join Date: Jun 2004
Location: Tupperville, Ontario, CANADA - like tupperware but with a population of 450.
Posts: 59
cleveland
Hey Tim! Got your phone number. Will call sometime.
If the masters age limit will be lowered next year, I'll be in the mix to try and pick Eli off. Or at least run blocker.
In stock 1/12, I felt like a pilon this year. I was out in left field with the motor setup. lol!
Looking forward to next year. The motor choice was great this year. I like the fact that I can use the handouts at a ROAR track. Remember the ROAR Nats in the late 90's in Georgia? No Kyosho square brushed motors......is a good thing. Couldn't use those motors at any track. Couldn't use those motors on anything!!
If the masters age limit will be lowered next year, I'll be in the mix to try and pick Eli off. Or at least run blocker.
In stock 1/12, I felt like a pilon this year. I was out in left field with the motor setup. lol! Looking forward to next year. The motor choice was great this year. I like the fact that I can use the handouts at a ROAR track. Remember the ROAR Nats in the late 90's in Georgia? No Kyosho square brushed motors......is a good thing. Couldn't use those motors at any track. Couldn't use those motors on anything!!
12-02-2006, 10:26 PM
#1263
Cleveland 2006 sponsor info not sure about some of the motor tuners. Just got from the video intro so might not be too accurate.
car, motor, batts, tires, body, radio
Mod TC A main:
Paul LeMieux- X ray, Truespeed, SMC, Jaco, Protoform, Futaba
Barry Baker- X ray, Checkpoint, SMC, Jaco, Protoform, Futaba
Mike Blackstock- X ray, Trinity, Trinity, Jaco, Protoform, KO
Ralph Burch- X ray, Trinity, SMC, Jaco, Protoform, KO
Jilles Groskamp- X ray, Trinity, Trinity, Jaco, Protoform, KO (sticks)
Ray Darroch- X ray, Truspeed, SMC, Jaco, Protoform, JR
Billy Easton- Yokomo, Brood, Brood, Jaco, Parma, Futaba
Chris Doseck- Xray, Peak, VooDoo, BSR, ProtoForm, KO
Jeff Dayger- RDX, Trinity, Trinity, Jaco, ??, Futaba
Mike Dumas- Losi, Brood, Brood, Jaco, Protoform, JR
19turn TC A main:
Paul LeMieux- X ray, Truespeed, SMC, Jaco, Protoform, Futaba
Chris Tosolini- Corally, EA, Checkpoint, Parma, Parma, Airtronics
Jeff Dayger- RDX, Trinity, Trinity, Jaco, ??, Futaba
Mo Denton- Corally, EA, EA, Parma, Parma, ?
Mike Dumas- Losi, Brood, Brood, Jaco, Protoform, JR
Andrew Grey- Losi, Peak, Peak, Jaco, Protoform, JR
Andrew Ellis- X ray, EA, SMC, Jaco, Parma, KO
Mike Blackstock- X ray, Trinity, Trinity, Jaco, Protoform, KO
Bobby Flack- X ray, Trinity, Trinity, Jaco, Protoform, KO
Bary Baker- X ray, EA, SMC, Jaco, Protoform, Futaba
Stock TC A main:
Jeff Cuffs- Corally, Trinity, Trinity, TRC, Parma, Futaba
Andrew Ellis- X ray, EA, SMC, Jaco, Parma, KO
Christopher Goetz- Schumacher, EA, Hurricane, Parma, Parma, Futaba
Craig Xavier- Losi, Express, Express, Jaco, Protoform, KO
Robbie Dodge- Corally, Express, Express, Jaco, Protoform, KO
TJ Bradley- Corally, EA, SMC, Jaco, Protoform, Airtrinics
Jarrod Langlois- Corally, Putnam, Hyperform, Parma, Parma, KO
Brad Johnson- Corally, ?, Hurricane, Parma, Parma, KO
Rob Schaffer- Associated, Orion, Peak, Parma, Protoform, JR
Mo Denton- Corally, EA, EA, Parma, Parma, Nomadio
car, motor, batts, tires, body, radio
Mod TC A main:
Paul LeMieux- X ray, Truespeed, SMC, Jaco, Protoform, Futaba
Barry Baker- X ray, Checkpoint, SMC, Jaco, Protoform, Futaba
Mike Blackstock- X ray, Trinity, Trinity, Jaco, Protoform, KO
Ralph Burch- X ray, Trinity, SMC, Jaco, Protoform, KO
Jilles Groskamp- X ray, Trinity, Trinity, Jaco, Protoform, KO (sticks)
Ray Darroch- X ray, Truspeed, SMC, Jaco, Protoform, JR
Billy Easton- Yokomo, Brood, Brood, Jaco, Parma, Futaba
Chris Doseck- Xray, Peak, VooDoo, BSR, ProtoForm, KO
Jeff Dayger- RDX, Trinity, Trinity, Jaco, ??, Futaba
Mike Dumas- Losi, Brood, Brood, Jaco, Protoform, JR
19turn TC A main:
Paul LeMieux- X ray, Truespeed, SMC, Jaco, Protoform, Futaba
Chris Tosolini- Corally, EA, Checkpoint, Parma, Parma, Airtronics
Jeff Dayger- RDX, Trinity, Trinity, Jaco, ??, Futaba
Mo Denton- Corally, EA, EA, Parma, Parma, ?
Mike Dumas- Losi, Brood, Brood, Jaco, Protoform, JR
Andrew Grey- Losi, Peak, Peak, Jaco, Protoform, JR
Andrew Ellis- X ray, EA, SMC, Jaco, Parma, KO
Mike Blackstock- X ray, Trinity, Trinity, Jaco, Protoform, KO
Bobby Flack- X ray, Trinity, Trinity, Jaco, Protoform, KO
Bary Baker- X ray, EA, SMC, Jaco, Protoform, Futaba
Stock TC A main:
Jeff Cuffs- Corally, Trinity, Trinity, TRC, Parma, Futaba
Andrew Ellis- X ray, EA, SMC, Jaco, Parma, KO
Christopher Goetz- Schumacher, EA, Hurricane, Parma, Parma, Futaba
Craig Xavier- Losi, Express, Express, Jaco, Protoform, KO
Robbie Dodge- Corally, Express, Express, Jaco, Protoform, KO
TJ Bradley- Corally, EA, SMC, Jaco, Protoform, Airtrinics
Jarrod Langlois- Corally, Putnam, Hyperform, Parma, Parma, KO
Brad Johnson- Corally, ?, Hurricane, Parma, Parma, KO
Rob Schaffer- Associated, Orion, Peak, Parma, Protoform, JR
Mo Denton- Corally, EA, EA, Parma, Parma, Nomadio
Last edited by Speedie; 12-03-2006 at 10:19 PM.
12-03-2006, 07:13 AM
#1264
Barry Baker and Chris Tosolini were EA Tuned motors in 19 turn. Jeff Cuffs ran Trinity tuned motors (By Sarquis) Jeff Dayger should be RDX, Trinity, Trinity, Jaco, ??, Futaba. Doseck should be Xray, Peak Mod's, VooDoo, BSR, ProtoForm, KO. Everything else looks correct on there.
EA
EA
Last edited by EAMotorsports; 12-03-2006 at 10:37 AM.
12-03-2006, 07:19 AM
#1265
Doseck = Peak motors
12-03-2006, 04:51 PM
#1266
Robbie Dodge- Express motor, Jaco tires
12-03-2006, 10:29 PM
#1268
Originally Posted by bill941
Ok I think you are misunderstanding we want it fixed more then you believe me and it will be period I don't care what it takes trust me on that but we are trying all options.I race 1/12 so I know what a pain it was.I would never tell anyone to just deal with it anyone that has talk to me in person can tell you that.I agree on the steps by the way I think I will end up building some wood steps before next year.I am not small either 240-250 not huge but those steps suck bad. So consider that one fixed.What I want to do is use mdf for the track and glue it also.This new carpet seems to just not work the same as the older stuff or something.But keep in mind guys we are here because of guys the racers I and everyone else knows that completely.You wanted stuff fixed last year we did a pretty good job I think working on it.I know no race is perfect period everyone has room to improve we atleast try to do that.
One option you might try is talking to Tony Stewart and seeing if he has any pull with home depot. Might be able to work something out for the wood that way. Or have Paul L. talk to him. Always pays to know people...
Looking forward to next year.
12-07-2006, 05:14 PM
#1269
Indoor Champs 2006
I need to thank everyone that help at this years Champs,sponsors,driver and the workers. Your help is what makes this race great. We know that we are not perfect, but we are listening. We made some great improvements to the race this year ,but we need to do more. Your commit and ideas are most helpfull. We will do any thing and every thing we can to make this the world best race Thank You All Mr.Bill 28th U.S.INDOOR CHAMPS COMING ON NOV. 21 2007
12-10-2006, 08:47 AM
#1270
Indoor Champs 2006
We know that some driver could not make the race this year, so that we keep our mailing list up to date,if you want to stay on the mailing list please send your home address to me at [email protected]. If you came to this years race you are already on the list. Thanks again to all who came,racers, worked, and sponsor the US INDOOR CHAMPS see you in 2007 went the world comes to Cleveland 
Last edited by MR.BILL; 12-10-2006 at 03:34 PM.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
