1/10 R/C F1's...Pics, Discussions, Whatever...
#1831
Tech Addict
iTrader: (6)
Not sure about the rear as they both use hex style. I only have an F103 and the hex hub for the rear is larger than a traditional touring car hub. Is the HPI the same size as a touring car?
#1833
R/C Tech Elite Member
iTrader: (37)
F103 front rim is completely different to HPI F10. HPI uses a hex hub while HPI uses two 8x5mm bearings in the rim which slot over the axle.
Not sure about the rear as they both use hex style. I only have an F103 and the hex hub for the rear is larger than a traditional touring car hub. Is the HPI the same size as a touring car?
Not sure about the rear as they both use hex style. I only have an F103 and the hex hub for the rear is larger than a traditional touring car hub. Is the HPI the same size as a touring car?
#1834
I just picked up a brand new Kyosho 1/10 Ferrari F92A body set from my LHS. It had been sitting there for years priced at $85. As soon as the owner saw me pick it up he said take it for $20. SOLD!!
Now I have to see if it will fit my F109. Worst case, I'll just use the decal sheet with the stock F109 body.
Anybody have pics of this body on their car?
Now I have to see if it will fit my F109. Worst case, I'll just use the decal sheet with the stock F109 body.
Anybody have pics of this body on their car?
#1835
Tech Champion
iTrader: (17)
I just picked up a brand new Kyosho 1/10 Ferrari F92A body set from my LHS. It had been sitting there for years priced at $85. As soon as the owner saw me pick it up he said take it for $20. SOLD!!
Now I have to see if it will fit my F109. Worst case, I'll just use the decal sheet with the stock F109 body.
Anybody have pics of this body on their car?
Now I have to see if it will fit my F109. Worst case, I'll just use the decal sheet with the stock F109 body.
Anybody have pics of this body on their car?
#1837
Tech Initiate
For the front you will need:
#103023 ALUMINUM STEERING KNUCKLE SET (FOAM TIRE/ORANGE)
For the rear:
#102917 BALL DIFF SET FOR FOAM WHEELS (95 TOOTH/64 PITCH)
The new HPI F1 car uses the same diameter axle as the older HPI F1 car (which was nothing but a 1/4" pan car axle). The old HPI F1 even used pan car rims. I have one of those cars and need to set it up for rubber tires due to the rules at a local track. I plan on buying the stock parts for an F10 in order to allow me to use rubber tires on the old HPI chassis.
Ruppster
#1839
I just finished the body of my new F1 car. It is a Sauber C13 (with a C12 body) and home made decals and a magazin (watch) picture. I still have to do De Cesaris' helmet but I wanted to submit the pictures to Tamiyas' F1 contest before it is too late.
Proberbly they will throw out my entry since I used my own decals.
Proberbly they will throw out my entry since I used my own decals.
#1842
Tech Elite
iTrader: (2)
September 25th F1 race
Ultimate F1 Day
Saturday September 25th
Camarillo California , track opens at 7AM for practice
3 min , fast lap Qualifying 10:00 AM
3 15 minute races
2 mandatory pit stops
http://www.charleslightfoot.com/UF1SD.html
Raffle prize #1
Professionally built, F104 Pro, with Tekin RS ESC, Novak 21.5 motor,
2.4 receiver, Orion 3200 lipo, Shimizu rubber, Calvinization modification, custom painted F60 body from F1 Paint-lab...
Ultimate RTR F1... just bind to your radio and
go... estimated cost $920
Raffle prize #2
Tamiya F104 Ferrari Kit
Each racer will have their name placed in a container... after each race, if you did NOT receive a penalty your name
will be placed again in the container, increasing your odds of winning... Also after each race, the announcer and the
pit marshal will each choose one person who they felt was the cleanest driver of that race, regardless of how they
finished and there name will be added again to the container... Basically the cleaner you drive all day, the better
your chances of winning the prize Also, in case of a tie, the driver with the least amount of penalties win...
Saturday September 25th
Camarillo California , track opens at 7AM for practice
3 min , fast lap Qualifying 10:00 AM
3 15 minute races
2 mandatory pit stops
http://www.charleslightfoot.com/UF1SD.html
Raffle prize #1
Professionally built, F104 Pro, with Tekin RS ESC, Novak 21.5 motor,
2.4 receiver, Orion 3200 lipo, Shimizu rubber, Calvinization modification, custom painted F60 body from F1 Paint-lab...
Ultimate RTR F1... just bind to your radio and
go... estimated cost $920
Raffle prize #2
Tamiya F104 Ferrari Kit
Each racer will have their name placed in a container... after each race, if you did NOT receive a penalty your name
will be placed again in the container, increasing your odds of winning... Also after each race, the announcer and the
pit marshal will each choose one person who they felt was the cleanest driver of that race, regardless of how they
finished and there name will be added again to the container... Basically the cleaner you drive all day, the better
your chances of winning the prize Also, in case of a tie, the driver with the least amount of penalties win...