Durango DEX210 Thread
#4278
Tech Elite
iTrader: (10)
Join Date: Nov 2004
Location: Norwood, OH...and CCRCR and The OhioRCFactory
Posts: 2,974
Trader Rating: 10 (100%+)
Has anybody had any issues with the doodad that holds the servo mounts mating properly with the chassis wings and lining up with the holes properly?
The right side seems to mate up just fine and line up with the steering rack mount, but the holes don't line up, and the left side just doesn't line up with ANYTHING.
The right side seems to mate up just fine and line up with the steering rack mount, but the holes don't line up, and the left side just doesn't line up with ANYTHING.
#4280
Broken Shock Mount
Where can I get one of these? Thanks for any help
#4283
Tech Elite
iTrader: (14)
Kit has lots of tuning kits so basically it depends on you if you want to get the blings or just the spare.
So over all its a great kit, not sure about the B4 as i have yet to own one.Compared to the 22, well the 22 tuning kits are not plenty included in the kit, just the kick up plates and shims. and you tend to replace the stock steering link to Allu to solve the Binding issue, the Diff nut needs to be replaced to V2, you also need to change the King pins screw to threaded to solve the king pins being broken. Electronics placement for the 22 is also an issue unless you get LP servo and micro Rx and ESC's. But handling wise 22 is also a competitive car, but did not have the juice to pull of the recent Reedy race of champions though ( just my thought) hahaha , get my point .
#4285
Tech Elite
iTrader: (14)
From OOple.com
CF Rear Links
Raul Garcia and MantisWorks also manufactures these fix, so no worries for this problem.
Losipartshouse is a bit cheaper than Amain but the coupon discount and points is better at Amain.
#4286
I have been running the sc10 diff with 1000 diff oil for a couple of weeks. Having great success with it. I would suggest trying it.
#4287
Moderator
iTrader: (470)
Join Date: Nov 2009
Location: North Carolina by way of SoCal!
Posts: 4,785
Trader Rating: 470 (100%+)
#4288
Tech Master
iTrader: (26)
#4289
Tech Lord
iTrader: (52)
Use motor spray to clean all the shock parts out. Let dry. Thread lock bolt and let sit overnight. Build the shocks the next day. Should be ok and don't use TD red threadlock - no good.
I have a setup question that I hope you guys can help me with.
I am running MM4 on our 40x100 asphalt/carpet offroad track.
Front: full trailing, 30 castor, spring stock, 1.5 camber
Rear: 3.5 toe, spring 1 harder than stock (light red), 1.5 anti squat, 1.5 camber
Car is good for me, nice to drive, and stable, quick enough.
The car pushes on-power. We have a lot of Durangos at or track - one guy said to run 3 trailing to help with the on-power push.
From what I have read, this seems counter-intuitive to me... I put 24g in the nose and it helped but not enough.
Should I go to 3 trailing??? I do not need any more turn in - car has enough now.
Any ideas? Thanks
I have a setup question that I hope you guys can help me with.
I am running MM4 on our 40x100 asphalt/carpet offroad track.
Front: full trailing, 30 castor, spring stock, 1.5 camber
Rear: 3.5 toe, spring 1 harder than stock (light red), 1.5 anti squat, 1.5 camber
Car is good for me, nice to drive, and stable, quick enough.
The car pushes on-power. We have a lot of Durangos at or track - one guy said to run 3 trailing to help with the on-power push.
From what I have read, this seems counter-intuitive to me... I put 24g in the nose and it helped but not enough.
Should I go to 3 trailing??? I do not need any more turn in - car has enough now.
Any ideas? Thanks
#4290
Tech Champion
iTrader: (14)
compared to the 22, hmm... more nimble and quick exiting corners ( shorter chassis) , downside is rear link stud location if you break a stud need to change the gearbox, but guys are making a fix for this and the problem with TD's Ball cups is also not yet solve, need to change to AE (TC5 Studs) and Losi Cups(heavy duty or extra rigid). Parts availabality i think guys are finding it hard to get parts ( not for sure on your location), but normally i get mine thru Amain/Losipartshouse. you just need to stock up.
Kit has lots of tuning kits so basically it depends on you if you want to get the blings or just the spare.
So over all its a great kit, not sure about the B4 as i have yet to own one.Compared to the 22, well the 22 tuning kits are not plenty included in the kit, just the kick up plates and shims. and you tend to replace the stock steering link to Allu to solve the Binding issue, the Diff nut needs to be replaced to V2, you also need to change the King pins screw to threaded to solve the king pins being broken. Electronics placement for the 22 is also an issue unless you get LP servo and micro Rx and ESC's. But handling wise 22 is also a competitive car, but did not have the juice to pull of the recent Reedy race of champions though ( just my thought) hahaha , get my point .
Kit has lots of tuning kits so basically it depends on you if you want to get the blings or just the spare.
So over all its a great kit, not sure about the B4 as i have yet to own one.Compared to the 22, well the 22 tuning kits are not plenty included in the kit, just the kick up plates and shims. and you tend to replace the stock steering link to Allu to solve the Binding issue, the Diff nut needs to be replaced to V2, you also need to change the King pins screw to threaded to solve the king pins being broken. Electronics placement for the 22 is also an issue unless you get LP servo and micro Rx and ESC's. But handling wise 22 is also a competitive car, but did not have the juice to pull of the recent Reedy race of champions though ( just my thought) hahaha , get my point .