52LikesTeam Losi JRXS Type-R
03-23-2007, 08:01 AM
#2371
Originally Posted by Yeti35
This is actually pretty good, those of us that don't have the car can see what everyone is havin issues with and be prepared for it. Pooky, Malc and myself appreciate the building info you guys are giving us.
Malc
03-23-2007, 08:04 AM
#2373
Originally Posted by POOKYT
LOL 
Brant
will be ready in 2 weeks when my car turns up........well' you gota keep the 2 week theme going.......well for another 2weeks at least until I get mine anyways 
Malc
03-23-2007, 08:09 AM
#2374
Let the conspiracy theories begin!
Hmmmm....
So anyone else starting to wonder what the 3 countersunk holes and 1 indexing hole on each side of the chassis are for? They are darn near dead center between the axles (well technically biased towards the front slightly) and close in to the battery. Weights perhaps to balance out LiPo? Dremel cutting blades? A winged top deck for extra stiffness? Link multiple Type Rrrrrrrs together to form MEGA R? My curiosity is piqued for sure.
Carry on...
Mike Slaughter
So anyone else starting to wonder what the 3 countersunk holes and 1 indexing hole on each side of the chassis are for? They are darn near dead center between the axles (well technically biased towards the front slightly) and close in to the battery. Weights perhaps to balance out LiPo? Dremel cutting blades? A winged top deck for extra stiffness? Link multiple Type Rrrrrrrs together to form MEGA R? My curiosity is piqued for sure.
Carry on...
Mike Slaughter
03-23-2007, 08:11 AM
#2375
Originally Posted by BillyCaldwell
Dangit Pookyt...get on his body fool!
03-23-2007, 08:13 AM
#2376
Originally Posted by masterhit
Hmmmm....
So anyone else starting to wonder what the 3 countersunk holes and 1 indexing hole on each side of the chassis are for? They are darn near dead center between the axles (well technically biased towards the front slightly) and close in to the battery. Weights perhaps to balance out LiPo? Dremel cutting blades? A winged top deck for extra stiffness? Link multiple Type Rrrrrrrs together to form MEGA R? My curiosity is piqued for sure.
Carry on...
Mike Slaughter
So anyone else starting to wonder what the 3 countersunk holes and 1 indexing hole on each side of the chassis are for? They are darn near dead center between the axles (well technically biased towards the front slightly) and close in to the battery. Weights perhaps to balance out LiPo? Dremel cutting blades? A winged top deck for extra stiffness? Link multiple Type Rrrrrrrs together to form MEGA R? My curiosity is piqued for sure.
Carry on...
Mike Slaughter
03-23-2007, 08:20 AM
#2377
Originally Posted by masterhit
Hmmmm....
So anyone else starting to wonder what the 3 countersunk holes and 1 indexing hole on each side of the chassis are for? They are darn near dead center between the axles (well technically biased towards the front slightly) and close in to the battery. Weights perhaps to balance out LiPo? Dremel cutting blades? A winged top deck for extra stiffness? Link multiple Type Rrrrrrrs together to form MEGA R? My curiosity is piqued for sure.
Carry on...
Mike Slaughter
So anyone else starting to wonder what the 3 countersunk holes and 1 indexing hole on each side of the chassis are for? They are darn near dead center between the axles (well technically biased towards the front slightly) and close in to the battery. Weights perhaps to balance out LiPo? Dremel cutting blades? A winged top deck for extra stiffness? Link multiple Type Rrrrrrrs together to form MEGA R? My curiosity is piqued for sure.
Carry on...
Mike Slaughter
I was told there for weights
Malc
03-23-2007, 08:25 AM
#2378
Originally Posted by TheCoolCanFanMan
Hi Mike
I was told there for weights
Malc
I was told there for weights
Malc
I will stick with telling people they are to form Mega R. And POOKYT will form the head.... 
Mike Slaughter
03-23-2007, 08:42 AM
#2380
Tech Initiate
if the holes are on the bottom deck and one either side these are for screw on weights
Paul
Paul
03-23-2007, 08:50 AM
#2382
Originally Posted by sportpak
What size fan are the mounts machined for? I could guess 25mmx25mm, but wanted to know for sure. I don't have my kit yet 
and was wanting to get some nik-nacs on the way.
and was wanting to get some nik-nacs on the way.I do believe them to be for 25x25mm fans which is great as this is the size fans I use for my Cool Can Fans and will be making something real cool for the R
Malc THE
CAN 
MAN
03-23-2007, 09:03 AM
#2383
FANS---
Machined holes in motor mount bulkhead are for 20mm fans.
CHASSIS-
Extra machined holes in the chassis are indeed for ballast weight. There are also small indexing holes on the front/rear centerpoint and left/right centerpoint for balancing and setting tweak.
Machined holes in motor mount bulkhead are for 20mm fans.
CHASSIS-
Extra machined holes in the chassis are indeed for ballast weight. There are also small indexing holes on the front/rear centerpoint and left/right centerpoint for balancing and setting tweak.
03-23-2007, 09:06 AM
#2384
Originally Posted by masterhit
That is what I figured as well, but how incredibly boring... I will stick with telling people they are to form Mega R. And POOKYT will form the head....
Mike Slaughter
I will stick with telling people they are to form Mega R. And POOKYT will form the head.... Mike Slaughter
03-23-2007, 09:09 AM
#2385
Originally Posted by J.Filipow
FANS---Machined holes in motor mount bulkhead are for 20mm fans.
The Cool Can Fan setup will definatley be using 25mm fans
Cheers Malc