Yokomo YZ-2
|
|||
#211
Tech Lord
iTrader: (22)
http://youtu.be/VLfji8XhMxs
Couple laps tonight ...with a gear diff on our track when it was dry and loose
And our track is just dirt
Couple laps tonight ...with a gear diff on our track when it was dry and loose
And our track is just dirt
#212
Tech Elite
Brass from teamyokomo.eu:
#213
http://youtu.be/VLfji8XhMxs
Couple laps tonight ...with a gear diff on our track when it was dry and loose
And our track is just dirt
Couple laps tonight ...with a gear diff on our track when it was dry and loose
And our track is just dirt
#214
Tech Master
iTrader: (32)
Just got off the phone with MIP. If we want a 17.5 puck system for the cars we need to send them an email to show interest. The email address is [email protected]. In the subject line make sure to address which version (mod or stock). Also reference the new axle length of 60.5mm as the length is not the same as the bmax counterpart.
#215
First off, SUPER JEALOUS of all the pics. Makes me want one BAD!!!!
Guess I'll have to wait till the 2nd order thru Amain. Hopefully the parts are coming too, just to have spares.
So this brings up a good question for those who have the new YZ2 as well and the prev. versions.
-Are you starting with your prior working setup?
*it may be too soon to tell, but are you having to deviate much with the new car?
-Again, it still might be too new, but is anyone finding any neg. with this car over the prev. versions? Overall is this a better car that would make them replace the prev. version with YZ2?
-I plan to dedicate my Carpet action to the YZ2. My Bmax2MR is relegated to Dirt duty. Curious if others who have mult. track surfaces are planning to run separate cars, or are you seeing this car slowly taking the place of the Bmax2?
Can't wait to get one!
MOmo
Guess I'll have to wait till the 2nd order thru Amain. Hopefully the parts are coming too, just to have spares.
Ran on clay track today and was able to match my fastest bmax2 time on the second pack. I setup the buggy the same as my bmax2 and found that this buggy carries more speed in all areas of the track. The were no issues with the landings and it was actually very forgiving.
1.6 machined pistons all around
32.5ft 30r
Kyosho gold in rear and whites in front
middle hole in shock towers
stock roll center settings
1.6 machined pistons all around
32.5ft 30r
Kyosho gold in rear and whites in front
middle hole in shock towers
stock roll center settings
So this brings up a good question for those who have the new YZ2 as well and the prev. versions.
-Are you starting with your prior working setup?
*it may be too soon to tell, but are you having to deviate much with the new car?
-Again, it still might be too new, but is anyone finding any neg. with this car over the prev. versions? Overall is this a better car that would make them replace the prev. version with YZ2?
-I plan to dedicate my Carpet action to the YZ2. My Bmax2MR is relegated to Dirt duty. Curious if others who have mult. track surfaces are planning to run separate cars, or are you seeing this car slowly taking the place of the Bmax2?
Can't wait to get one!
MOmo
#216
#218
Tech Elite
iTrader: (24)
First off, SUPER JEALOUS of all the pics. Makes me want one BAD!!!!
Guess I'll have to wait till the 2nd order thru Amain. Hopefully the parts are coming too, just to have spares.
So this brings up a good question for those who have the new YZ2 as well and the prev. versions.
-Are you starting with your prior working setup?
*it may be too soon to tell, but are you having to deviate much with the new car?
-Again, it still might be too new, but is anyone finding any neg. with this car over the prev. versions? Overall is this a better car that would make them replace the prev. version with YZ2?
-I plan to dedicate my Carpet action to the YZ2. My Bmax2MR is relegated to Dirt duty. Curious if others who have mult. track surfaces are planning to run separate cars, or are you seeing this car slowly taking the place of the Bmax2?
Can't wait to get one!
MOmo
Guess I'll have to wait till the 2nd order thru Amain. Hopefully the parts are coming too, just to have spares.
So this brings up a good question for those who have the new YZ2 as well and the prev. versions.
-Are you starting with your prior working setup?
*it may be too soon to tell, but are you having to deviate much with the new car?
-Again, it still might be too new, but is anyone finding any neg. with this car over the prev. versions? Overall is this a better car that would make them replace the prev. version with YZ2?
-I plan to dedicate my Carpet action to the YZ2. My Bmax2MR is relegated to Dirt duty. Curious if others who have mult. track surfaces are planning to run separate cars, or are you seeing this car slowly taking the place of the Bmax2?
Can't wait to get one!
MOmo
#219
Wing
ROAR rules that the wings cannot be clear
And I ran the car just as it is in the picture
But I run al my electronics down the middle feels better that way
And I ran the car just as it is in the picture
But I run al my electronics down the middle feels better that way
#221
Tech Master
iTrader: (32)
6.5 WINGS
6.5.1 Definition: Wings are aerodynamic devices attached to vehicles to increase down force and traction when a vehicle is traveling at speed. The dimensions of wings vary depending on the class of racing, and are described in class rules or specifications.
6.5.2 Only single element or two-element wings may be used, and then only when allowed by the class rules.
6.5.3 Wing Mountings:35
6.5.3.1 Wings should be mounted using wire or some other secure mounting system,and be no closer than 1/4” to the body except as provided below. The
distance between the wing and the body is measured between the rear deck
of the body and the flat portion of the wing chord.
6.5.3.2 Off-road wings may be mounted using wire or fastened directly to the
chassis. There is no minimum clearance for off-road wings. Front wings are
allowed if utilized on the body's full-scale counterpart. If allowed, front wing
dimensions are specified in the class rules.
6.5.3.3 On-road wings, when permitted, may be mounted directly to the body without clearance. Front wings are allowed if utilized on the body’s full-scale
counterpart. Driver must show proof of full-scale utilization.
6.5.3.4 Oval wings may be mounted to or through the rear window of the body.
6.5.3.5 In some classes, wings and spoilers may be used in combination. When allowed by the class rules, separate specifications are provided.
#222
Does anyone know when amain will get there next batch of YZ2's?
#224