Axiom Motors
#871
Tech Master
iTrader: (4)
Just wanted to give a big thanks to Dave, today at our local Superior Hobbies monthly club race ( over 100 entries total), fellow Team Death/Slickzero driver Mason McCombs to my Axiom powered CRC T-fource and TQ'd 19t 1/12th scale by over a lap with and Axiom KD19. He was well out in front in the main before a lapped car put him in a pipe hard, knocking his PT loose and then out of contention
#872
Axiom Results
Hi David
Smart Racing are pleased to report the following results:-
Scottish Radio Car Association
Touring Car Modified Class
1st & 2006 Scottish Champion Kevin Nicolson Smart Racing Team Driver
2nd Colin Leslie Smart Racing Owner & Team Driver
3rd Stephen Creswell Smart Racing Owner & Team Driver
In this 7 round championship with 5 counting rounds Team Smart Racing scored the following stats:-
* Ftd at 6 rounds
* Q 1, 2 & 3 at 3 rounds
* Finished in 1st place at 6 rounds
* Finished 1,2 & 3 at 2 rounds
Smart Racing are pleased to report the following results:-
Scottish Radio Car Association
Touring Car Modified Class
1st & 2006 Scottish Champion Kevin Nicolson Smart Racing Team Driver
2nd Colin Leslie Smart Racing Owner & Team Driver
3rd Stephen Creswell Smart Racing Owner & Team Driver
In this 7 round championship with 5 counting rounds Team Smart Racing scored the following stats:-
* Ftd at 6 rounds
* Q 1, 2 & 3 at 3 rounds
* Finished in 1st place at 6 rounds
* Finished 1,2 & 3 at 2 rounds
All results powered by Axiom IB 4200 Team Cells
.
#873
Monsters
!!!!STOP PRESS!!!!
Axiom Monster 27T motors are now BRCA legal for competition use in the UK
#874
Tech Champion
iTrader: (45)
Awesome news Colin!
Another product added to Axiom:
http://www.axiommotors.com/motors-br...s-c-21_83.html
You read right - Brushless.
Another product added to Axiom:
http://www.axiommotors.com/motors-br...s-c-21_83.html
You read right - Brushless.
#875
Tech Addict
iTrader: (88)
I ran my new checkpoint based AXIOM 11x2 this weekend and that thing is awsome. I was carring the front wheels all the way down the strightaway.I been racing electric's for about 10 years now and I have never ran a motor like it. I fell behind a lap in my main and made it back up and finshed third.Everyone was making comments on how fast my truck was, and it wasn't just fast it was a bullet. Thanks Dave for the bad @$$ motors.
#879
Tech Lord
iTrader: (103)
Originally Posted by dgullickson
I usually run the same brushes for a whole 2 day event unless they show burning.
Take motor apart, cut the comm, etc. and just clean up the brushes with a brush stick and once the motor is back together break in at 2v for 2 min.
Take motor apart, cut the comm, etc. and just clean up the brushes with a brush stick and once the motor is back together break in at 2v for 2 min.
#881
AXIOM Komodo Questions
Hi Guys,
Just received an Axiom Komodo 19T and have a couple of questions about it:
1. What are the standard brushes which are supplied with it?
2. Are the spare brushes in the blister pack the same as those fitted to the motor?
3. Rough gearing for a starting point? I'm thinking somewhere similar to a stock motor? Its for an RC10B4?
Thanks guys!
MIKE
Just received an Axiom Komodo 19T and have a couple of questions about it:
1. What are the standard brushes which are supplied with it?
2. Are the spare brushes in the blister pack the same as those fitted to the motor?
3. Rough gearing for a starting point? I'm thinking somewhere similar to a stock motor? Its for an RC10B4?
Thanks guys!
MIKE
#882
Tech Champion
iTrader: (45)
1. What are the standard brushes which are supplied with it? 767's if it was tuned for Offroad (I would need an order # to look up)
2. Are the spare brushes in the blister pack the same as those fitted to the motor? Yes
3. Rough gearing for a starting point? I'm thinking somewhere similar to a stock motor? Its for an RC10B4? Depends on the size of the track.
2. Are the spare brushes in the blister pack the same as those fitted to the motor? Yes
3. Rough gearing for a starting point? I'm thinking somewhere similar to a stock motor? Its for an RC10B4? Depends on the size of the track.
#883
Sure it depends on the track, I'm just after a starting point. If someone can post their AXIOM Komodo 19T rollout for a 1/10 ISTC, I can do the math and get a rough ball park figure to start from - I guess I should have mentioned that I haven't run a 19T motor for a very long time:-) Thanks for the real quick reply, I'm really looking forward to racing this motor.
MIKE
MIKE
Originally Posted by dgullickson
3. Rough gearing for a starting point? I'm thinking somewhere similar to a stock motor? Its for an RC10B4? Depends on the size of the track.