OCM KAOS DOMINATING
#2026
Tech Initiate
iTrader: (4)
I understand your point, if you take a look at a Jammin or a Mbx6, there all cf, where our cars are all alum. If I can save 3-4 ounces I'd be happy. I already have lightned pillow balls and lightened chassis on two of my evos and I've drilled out the side guards recently. Saw that on a pic on the net, kind of cool look especially on the pipe side. Some people say it has a benefit with the pipe temp, but I havn't noticed anything. Poinas2, if you get some cf parts made up let me know what you got, I'd love to test them.
#2027
Tech Master
iTrader: (2)
I understand your point, if you take a look at a Jammin or a Mbx6, there all cf, where our cars are all alum. If I can save 3-4 ounces I'd be happy. I already have lightned pillow balls and lightened chassis on two of my evos and I've drilled out the side guards recently. Saw that on a pic on the net, kind of cool look especially on the pipe side. Some people say it has a benefit with the pipe temp, but I havn't noticed anything. Poinas2, if you get some cf parts made up let me know what you got, I'd love to test them.
#2028
Tech Initiate
iTrader: (4)
Car overall gets a lot more dusty and underside of the pipe gets more crud on it, but if you have a air hose or a paint brush, it's a little bit more than normal. I just did it for the look and possible if any weight loss. Holes on mine are about 3/8" in diameter. I think the smaller the better imo. Good luck!!
#2031
it's raining here this week
gonna try 10000/5000/4000
next 7000/10000/3000 and 7000/7000/4000
yes
OCM is producing new bulkheads and arms
moulded in a new tougher plastic compound
bulkheads have reinforcements and bearings are tight fit at all sides
no shims needed
3 new ARTR versions will feature the newest diffhousings, new plastic rear uprights
new wingmounts and all other improvements
gonna try 10000/5000/4000
next 7000/10000/3000 and 7000/7000/4000
yes
OCM is producing new bulkheads and arms
moulded in a new tougher plastic compound
bulkheads have reinforcements and bearings are tight fit at all sides
no shims needed
3 new ARTR versions will feature the newest diffhousings, new plastic rear uprights
new wingmounts and all other improvements
Last edited by speedy2; 12-26-2008 at 08:18 AM.
#2032
Tech Rookie
#2033
Tech Regular
iTrader: (16)
Hi Guys, I have a ocm kaos DT19 roller to sell. heres the story. A friend of mine bought 4 of them (asked why?because I can) because he was waiting for his rc8 and was board. anyway I am getting rid of them for him there is 1 roller and 1 that only needs a few parts to make a roller I have a huge bunch of parts including anouther chassie. He is open to offers and he will seperate? Please pm me with any questions or offers and I will return all pms and pics, Thanks
#2034
Will Ocm and Mugen spur gears interchange?
#2035
KAOS EVO For Sale/Trade
If anyone is interested in another roller, please LMK.
I still have this one available. It is in a roller state now, I can include a practice motor like the .26 Sportwerks pictured along with Tx/Rx and servos if need be.
Any offers appreciated. I would like to get this in the hands of members that will continue to run them. We had great success with these buggies!!!
http://www.rctech.net/forum/r-c-item...condition.html
I still have this one available. It is in a roller state now, I can include a practice motor like the .26 Sportwerks pictured along with Tx/Rx and servos if need be.
Any offers appreciated. I would like to get this in the hands of members that will continue to run them. We had great success with these buggies!!!
http://www.rctech.net/forum/r-c-item...condition.html
#2036
Shaft size on the OCM outdrives is larger than mugens, they don't interchange.
#2037
thanks for the info!
#2038
so r there many people running the ocm buggy here in the usa and where is a good place for parts here and also i hear the mugen mbx5 parts works for most of it it is that ture.
#2039
yeaklet, I have tons of parts nip for the buggy and quite a few for the truck...At next to nothing prices. email me at [email protected] with what you need and I can get you prices. Can get parts out usually the next day after payment is made. Thx
#2040
yeaklet, I have tons of parts nip for the buggy and quite a few for the truck...At next to nothing prices. email me at [email protected] with what you need and I can get you prices. Can get parts out usually the next day after payment is made. Thx
s porter has got the goods ...tons of parts and a great guy to boot ....hey buddy got any more air filter replacements and wings still wanna look at your clutch stuff at the pit to