3racing F109
#406
3racing next batch of f109 are ready week one of 2010 along with there new touring car
#407
Tech Addict
Hello from France,
I bought this formula 1. I also bought a Brushless 8.5 motor and Li-Po Packs.
My track is a long and large permanent otside track. I want to run 48dp transmission (reliability).
Do you know some good combination in pinion/spur?
What are the spare parts I need?
What are the options (part numbers) I must buy? (front/rear springs, tunrbuckles....).
any advices or tips....
Thx from France!!!
Romuald
I bought this formula 1. I also bought a Brushless 8.5 motor and Li-Po Packs.
My track is a long and large permanent otside track. I want to run 48dp transmission (reliability).
Do you know some good combination in pinion/spur?
What are the spare parts I need?
What are the options (part numbers) I must buy? (front/rear springs, tunrbuckles....).
any advices or tips....
Thx from France!!!
Romuald
#409
Hello from France,
I bought this formula 1. I also bought a Brushless 8.5 motor and Li-Po Packs.
My track is a long and large permanent otside track. I want to run 48dp transmission (reliability).
Do you know some good combination in pinion/spur?
What are the spare parts I need?
What are the options (part numbers) I must buy? (front/rear springs, tunrbuckles....).
any advices or tips....
Thx from France!!!
Romuald
I bought this formula 1. I also bought a Brushless 8.5 motor and Li-Po Packs.
My track is a long and large permanent otside track. I want to run 48dp transmission (reliability).
Do you know some good combination in pinion/spur?
What are the spare parts I need?
What are the options (part numbers) I must buy? (front/rear springs, tunrbuckles....).
any advices or tips....
Thx from France!!!
Romuald
Caster plate
Turnbuckles
Associated front .020 springs springs ASC4113
As for gearing a rough guess would be a 45ish rollout (like 20/75) & kit tires 57mm - I use Kimbrough 48p gears myself.
Hope this helps ...
#410
Tech Addict
iTrader: (33)
Rear Springs or the CRC mod
Caster plate
Turnbuckles
Associated front .020 springs springs ASC4113
As for gearing a rough guess would be a 45ish rollout (like 20/75) & kit tires 57mm - I use Kimbrough 48p gears myself.
Hope this helps ...
Maybe this can give you a hint ...
Caster plate
Turnbuckles
Associated front .020 springs springs ASC4113
As for gearing a rough guess would be a 45ish rollout (like 20/75) & kit tires 57mm - I use Kimbrough 48p gears myself.
Hope this helps ...
Maybe this can give you a hint ...
i read heaps before i asked and couldnt find a 27t rollout..... It was right there though. Thanks heaps
Alex
#411
does the 3 racing version 2 tyre truer come with a case like version one had?
#412
Tech Addict
Hello from France,
Thx Inzane, for sure, it will help!!
Thx Inzane, for sure, it will help!!
#413
we have got all f109 spares in stock ....
use discount code "rctech " for an extra 10% off on 3racing only and shipping at £2.50 per order
use discount code "rctech " for an extra 10% off on 3racing only and shipping at £2.50 per order
#414
Tech Initiate
#415
Tech Initiate
i've just got mine. i've made a simplify spyker F1 2007 body.
i've put a mamba 6900kv (i'm waiting my ezrun 10T), it's too much for actual weather, but, i think it could be ok for dry and warm track...
a little bit over steer but, i've put the steel F103 axle so it helps me.
my roll damper has 40wt and 1 hole. it's a little bit hard for cold track. i'll put box setup
ps: salut le toulousin!
i've put a mamba 6900kv (i'm waiting my ezrun 10T), it's too much for actual weather, but, i think it could be ok for dry and warm track...
a little bit over steer but, i've put the steel F103 axle so it helps me.
my roll damper has 40wt and 1 hole. it's a little bit hard for cold track. i'll put box setup
ps: salut le toulousin!
#416
Here's a pic of my F-109. Still trying to work out the kinks. Also need to do the CRC side spring mod.
#417
#418
Tech Initiate
Good news abe-racing!
has someone try the f103 suspension arm set #50503 to decrease front grip? does it work well?
has someone try the f103 suspension arm set #50503 to decrease front grip? does it work well?
#419
Tech Initiate
Good news abe-racing!
has someone try the f103 suspension arm set #50503 to decrease front grip? does it work well?
has someone try the f103 suspension arm set #50503 to decrease front grip? does it work well?
#420
Tech Master
iTrader: (27)
Join Date: Dec 2003
Location: im 4rm a far away place called 1st
Posts: 1,849
Trader Rating: 27 (100%+)
YAY its done! lol here she is....(cell phone pics)