MurfDogg Motor Works Discussion thread
#1126
Murfdogg Products had a fantastic showing at the recent Toys for Tots Onraod race in El Paso, TX. Murfdogg Products assisted drivers to secure 1st, 2nd, 5th, and 6th qualifying positions for the A-Main in the TC 10.5T class and resulted in the A-Main win. Performance and reliablility was unmatched! Thanks for such great products Matt!
#1127
Murfdogg Octane Booster
If you are looking for a little more performance edge over the competition, the new Murfdogg Octane Booster power control module is perfect! Had the chance to use the new Octane Booster during an Onroad practice session yesterday. The Octane Booster with leads is much easier to instal and offers racers many options for mounting locations. Most importantly the Octane Booster provided a significantly noticable increase in punch over the stock capacitor and provided cooler operating temps on the ESC/Motor.
Truly appreciate the added power and performance enhancement!
Truly appreciate the added power and performance enhancement!
#1128
Tech Master
iTrader: (3)
If you are looking for a little more performance edge over the competition, the new Murfdogg Octane Booster power control module is perfect! Had the chance to use the new Octane Booster during an Onroad practice session yesterday. The Octane Booster with leads is much easier to instal and offers racers many options for mounting locations. Most importantly the Octane Booster provided a significantly noticable increase in punch over the stock capacitor and provided cooler operating temps on the ESC/Motor.
Truly appreciate the added power and performance enhancement!
Truly appreciate the added power and performance enhancement!
#1129
Tom,
They just arrived. Demensions are: 31.4mm long x 10.6mm wide x 13.7mm tall, with +/- leads being approximately 95mm in length allowing you to mount in numerous locations within your car/chassis. The Murfdogg Octane Booster adds a noticable amount of punch over stock setup. Several racers observing practice yesterday, at a larger scheduled event (running against same electronics/motor setup cars, minus the Octane Booster) noticed I could easily pull about 2-3 car lengths out of corners on competitors with added punch! It is working superbly with fantastic on track results!
They just arrived. Demensions are: 31.4mm long x 10.6mm wide x 13.7mm tall, with +/- leads being approximately 95mm in length allowing you to mount in numerous locations within your car/chassis. The Murfdogg Octane Booster adds a noticable amount of punch over stock setup. Several racers observing practice yesterday, at a larger scheduled event (running against same electronics/motor setup cars, minus the Octane Booster) noticed I could easily pull about 2-3 car lengths out of corners on competitors with added punch! It is working superbly with fantastic on track results!
Last edited by rangerjkb; 12-31-2011 at 08:29 AM.
#1131
You can contact Matt and purchase direct from Murfdogg Products, please contact him at [email protected].
#1134
Tech Rookie
Reminder
Just a reminder that Murfdogg will be closed until January 16th as Matt has headed to Tulsa for the annual Chili Bowl Dirt Oval race. Murfdogg team drivers can very knowledgeably answer questions if you need assistance.
Joe Murphy
Joe Murphy
#1135
i am running 17.5/blinky carpet oval. looking for a new motor with a little more power. i have been running trinity motors d3/revtech. anyone run murfdogg in carpet oval? how does the murfdogg motor do? also is the new octane booster of any use to a 17.5 blinky class? any help would be great.
thanks, matt
thanks, matt
#1136
Matt,
The Octane Booster will provide benifits in your application. Any ESC with a power capacitor provides some return power. The Octane Booster will give noticably better burst over stock capacitors. Hopefully another driver or user can chime in to provide you information on 17.5T Blinky carpet oval question.
The Octane Booster will provide benifits in your application. Any ESC with a power capacitor provides some return power. The Octane Booster will give noticably better burst over stock capacitors. Hopefully another driver or user can chime in to provide you information on 17.5T Blinky carpet oval question.
#1137
when adding the octane booster do you leave the stock capacitor on the tekin rs or take it off?
matt
matt
#1138
Remove the stock capacitor and wire the +/- Octane Booster leads to same, but appropriate (+/-) posts.