Serpent 966
02-05-2010, 08:48 AM
#961
Just leave out the alu bush on top off the servo saver and tighten the saver under the radion plate, this gives the same result.... don't need to buy a new radio plate, get yourself 3 sets of tires instead... 
http://www.mijnalbum.nl/GroteFoto-NMQ6UVTL.jpg
http://www.mijnalbum.nl/GroteFoto-NMQ6UVTL.jpg
02-05-2010, 01:06 PM
#963
I have not actually gotten one to see, but I am under the impression that the new kits come with the new tray. The new tray can handle running the link system for the flex like the guys were running at the last Worlds. It is a change that is already in place and comes with the newer kits.
DJ Apolaro
DJ Apolaro
02-05-2010, 01:45 PM
#964
I see some people have the fuel hose nipple screwed into the rear of the gas tank lid. Mine only has the holes to screw it in on the left and right side of the gas tank lid.
Do you have to drill a hole into the rear of the lid or something and then block off the left and right holes with 2 set screws?
Do you have to drill a hole into the rear of the lid or something and then block off the left and right holes with 2 set screws?
02-07-2010, 10:05 AM
#966
CSO 966
12x18 Alum. Front Steering Block Bearing Holder
12x18 Alum. Front Steering Block Bearing Holder
02-16-2010, 05:41 AM
#968
Xceed
1/8 Zytec V2 Body weekend arrive !!
1/8 Zytec V2 Body weekend arrive !!
02-16-2010, 06:03 AM
#969
I found an option, which i feel better using than drilling a hole at the rear of the lid.
angled pressure nipple.
http://serpent.com/product/1434/
angled pressure nipple.
http://serpent.com/product/1434/
02-16-2010, 09:08 PM
#970
questions..
Hey guys, I am new to the Serpent family and I have a couple of build questions.
The offset front knuckles, on what side do the numbers do what? If the 1 is on right what does that do and what does the 2 do on the right. I know that one way the car has more turn in and he other the car has more on power steering, but witch is witch?
What is this Link system I keep hearing about? I know that I have the older topdeck from what I have seen on here.
Thanks guys.
The offset front knuckles, on what side do the numbers do what? If the 1 is on right what does that do and what does the 2 do on the right. I know that one way the car has more turn in and he other the car has more on power steering, but witch is witch?
What is this Link system I keep hearing about? I know that I have the older topdeck from what I have seen on here.
Thanks guys.
02-16-2010, 09:42 PM
#971
[QUOTE=Erock;7017143]Hey guys, I am new to the Serpent family and I have a couple of build questions.
The offset front knuckles, on what side do the numbers do what? If the 1 is on right what does that do and what does the 2 do on the right. I know that one way the car has more turn in and he other the car has more on power steering, but witch is witch?
What is this Link system I keep hearing about? I know that I have the older topdeck from what I have seen on here.
Thanks guys.[/QUOTE
Looking from the back of the car:
1 on Left
2 on Right
I am 80% sure but do not quote me just looked at my knuckles and didnt see any number on em... so im not 2 sure.
And if you reverse them i am not sure what happens i have never done it
The offset front knuckles, on what side do the numbers do what? If the 1 is on right what does that do and what does the 2 do on the right. I know that one way the car has more turn in and he other the car has more on power steering, but witch is witch?
What is this Link system I keep hearing about? I know that I have the older topdeck from what I have seen on here.
Thanks guys.[/QUOTE
Looking from the back of the car:
1 on Left
2 on Right
I am 80% sure but do not quote me just looked at my knuckles and didnt see any number on em... so im not 2 sure.
And if you reverse them i am not sure what happens i have never done it
02-16-2010, 10:15 PM
#973
Tech Adept
1 on the left 2 on the right
02-16-2010, 11:37 PM
#974
Hey guys, I am new to the Serpent family and I have a couple of build questions.
The offset front knuckles, on what side do the numbers do what? If the 1 is on right what does that do and what does the 2 do on the right. I know that one way the car has more turn in and he other the car has more on power steering, but witch is witch?
What is this Link system I keep hearing about? I know that I have the older topdeck from what I have seen on here.
Thanks guys.
The offset front knuckles, on what side do the numbers do what? If the 1 is on right what does that do and what does the 2 do on the right. I know that one way the car has more turn in and he other the car has more on power steering, but witch is witch?
What is this Link system I keep hearing about? I know that I have the older topdeck from what I have seen on here.
Thanks guys.
02-17-2010, 08:40 AM
#975
Thanks for the reply.
Is anyone still running the link system?
On the knuckles, I just want the car to turn in like a banchee. I ran the M3 Evo last year and I had all the on power I could handle but I was never happy with the aggresive turn in.
I think Chicky and I are going to do some recon on this car. LOL
Is Palo's set up from the nats last year in toledo posted anywhere?
Thanks again.
Is anyone still running the link system?
On the knuckles, I just want the car to turn in like a banchee. I ran the M3 Evo last year and I had all the on power I could handle but I was never happy with the aggresive turn in.
I think Chicky and I are going to do some recon on this car. LOL
Is Palo's set up from the nats last year in toledo posted anywhere?
Thanks again.