Hot Bodies D413 1/10 4WD Buggy
Tech Elite
iTrader: (125)
Also use the Protek 100ss in my T5m and b5m (great servos, great price) and the savox 1258 in the D413. Use the HB aluminum horn as well.
Tech Adept
iTrader: (2)
Sweet, thanks guys for servo suggestions !
Tech Apprentice
iTrader: (2)
Any ideas on who could be buying HB?
I havent really had an issue with the stock caps..They have popped off twice and with good reason...i had a few pretty good get off's when they popped. In fact i was surprised i didn't break anything.
speaking of breaking..on the last few days of running i've had my left rear tie rod ball cup snap on me right where it tapers to fit the hub..(where it goes from round to flat). Didn't have any get off's i can think of that would cause it to break..the odd thing it's just the left rear that keeps breaking. (three times now).
Checked to see if anything else might be bent causing it to break...but its all square and good to go.
anyone else breaking right there?
speaking of breaking..on the last few days of running i've had my left rear tie rod ball cup snap on me right where it tapers to fit the hub..(where it goes from round to flat). Didn't have any get off's i can think of that would cause it to break..the odd thing it's just the left rear that keeps breaking. (three times now).
Checked to see if anything else might be bent causing it to break...but its all square and good to go.
anyone else breaking right there?
Tech Master
iTrader: (2)
I'm looking to replace those 2x10'll diff screws to titanium ones(112787 stock). Would anyone know where to find some?
Tech Rookie
Bearings
Anyone replaced the stock bearings throughout? If so, any suggestions? Avid, others?
Tech Elite
iTrader: (149)
Tech Rookie
Tech Master
iTrader: (2)
What wing are you guys using
Tech Regular
iTrader: (5)
Tech Master
iTrader: (1)
I'm running Avid Ceramic bearings in my D413 and my Xray Xb2CE. Awesome bearings. I clean them with an ultrasonic cleaner and orange cleaner per Avid instructions. Bearings typically last the life of the car.
Tech Apprentice
iTrader: (1)
https://www.amainhobbies.com/sworkz-...800afy/p267312
Last wing you will ever need for this buggy. Make sure you get the no hole version, measure twice and drill your holes and trim the wickerbill.
Available in Black Yellow Orange White no holes
Last wing you will ever need for this buggy. Make sure you get the no hole version, measure twice and drill your holes and trim the wickerbill.
Available in Black Yellow Orange White no holes
Tech Apprentice
iTrader: (2)
https://www.amainhobbies.com/sworkz-...800afy/p267312
Last wing you will ever need for this buggy. Make sure you get the no hole version, measure twice and drill your holes and trim the wickerbill.
Available in Black Yellow Orange White no holes
Last wing you will ever need for this buggy. Make sure you get the no hole version, measure twice and drill your holes and trim the wickerbill.
Available in Black Yellow Orange White no holes
Tech Regular
iTrader: (7)
How are the Aluminum Shock Caps Installed?
I have the aluminum shock caps on order. I see how most of it is put together. Are there any guides?
http://hpiracing.world/en/part/114112
http://hpiracing.world/en/part/114112
Last edited by Tibbar110; 05-22-2016 at 03:49 PM.