Shepherd Velox V10
#481
When Solid and OneWay will release?
#482
Tech Apprentice
hey there,
solid axle and one way will be one part, easy to switch between one way and solid axle without disassembling something !!
The parts are already in production, will have to get some tests with the final version and will be available in january.
Alex
solid axle and one way will be one part, easy to switch between one way and solid axle without disassembling something !!
The parts are already in production, will have to get some tests with the final version and will be available in january.
Alex
#483
Thanks the information!
So I'll temporary use this part for upcoming race..
So I'll temporary use this part for upcoming race..
#484
The spring of steering servo safer I feel too soft, if use 1mm preload, the car not very trace traction, even 2mm, 3mm is very good but servo safe function lost, so I modify mine by using an RRR original front spring…. now only use 0.5mm preload
#485
Hi from Greece,
During one of the recent 1/10 races in Arena track, a local, 13 yr old talented driver, used his brand new out of the box, Velox for 1 training session ( Saturday) and the next we know during Sunday race, finishes 1st among 40 drivers, braking Tosolini's track record by approx 0.6s
Final was 30 mins duration
This tells alot for the car also...
During one of the recent 1/10 races in Arena track, a local, 13 yr old talented driver, used his brand new out of the box, Velox for 1 training session ( Saturday) and the next we know during Sunday race, finishes 1st among 40 drivers, braking Tosolini's track record by approx 0.6s
Final was 30 mins duration
This tells alot for the car also...
#486
Tech Rookie
Shepherd Velox V10
Does any one know where you can buy the Shepherd Velox V10 kit here in the USA? And where you can purchase replacement parts?
Thanks
Thanks
#487
#488
Tech Apprentice
hey guys,
the official distribution for the US is Josh Cyrul, so use the link above to find the needed information.
@boy2rc
nice job,
the spring for the servo saver is choosed like this for the regular use.
With the first kits we realized that we went to soft !!!
But still i think it ist ok as we tested it like this.
I think if we get further customer feedback we will work on it.
By the way, if you have any feedback or further special questions you can also use the service email hotline for this.
This email account will be active from now on.
So use [email protected]
for questions and feedback for the V10
and also we will start the same for the V8 at
[email protected]
So keep on racing
Alex
the official distribution for the US is Josh Cyrul, so use the link above to find the needed information.
@boy2rc
nice job,
the spring for the servo saver is choosed like this for the regular use.
With the first kits we realized that we went to soft !!!
But still i think it ist ok as we tested it like this.
I think if we get further customer feedback we will work on it.
By the way, if you have any feedback or further special questions you can also use the service email hotline for this.
This email account will be active from now on.
So use [email protected]
for questions and feedback for the V10
and also we will start the same for the V8 at
[email protected]
So keep on racing
Alex
#489
Tech Apprentice
Again its me,
for the future we will also install a tech area on our website
www.team-shepherd.com for both cars.
In this area we will publish any information, so if we forgot something to put into the manual for example, if we change something, if we have further information for some special adjustments and so on and so on.
So stay tuned at check our site for the tech area, we will publish the area within the next days.
regards
Alex
for the future we will also install a tech area on our website
www.team-shepherd.com for both cars.
In this area we will publish any information, so if we forgot something to put into the manual for example, if we change something, if we have further information for some special adjustments and so on and so on.
So stay tuned at check our site for the tech area, we will publish the area within the next days.
regards
Alex
#490
Tech Rookie
Thanks for the info!
#491
just build my shepherd v10 one of 4 build in my club down here in australia have had a little drive running in a engine all seems good will tell when i have a real go on the track this weekend build was great just a few little things but over all great car thank,s tony
#493
Tech Regular
iTrader: (11)
#494
Tech Champion
iTrader: (91)
www.ashfordhobby.com he has them listed.
#495
just ran the v10 at brendale here in brisbane australia where the 2006 worlds were and car was great straight out of the box just a few changes and it was great good steering and a well balanced car from the start well inpressed good job shepherd car can only get better thank,s tony