Team Associated TC4
#6196
Originally Posted by DawgMeat1
I've been surfin' the net in search of replacement screws, the aluminum ones just just stripout too easily
http://www.lunsfordracing.com/catalo...c4_3837470.htm 95.00bucks
please let there be another option
http://www.lunsfordracing.com/catalo...c4_3837470.htm 95.00bucks
please let there be another option
Getting my car this weekend!!! Woooohooooooo!!!!!!!!!!!!!!!!
#6197
Tech Rookie
Originally Posted by DirtyDog3375
I am more interested in what brand and type the motor is. (ie. trinity, reedy, dc, etc... and what type is it??? v2, laydown, etc......) Cause I have not seen that type of endbell before.
Thanks,
Leonard.
Thanks,
Leonard.
it come with the new silver octagon brushes
I have Orion V2 7x1, 9x1 and Cobalt 8x1, the Epic Shock motor run way cooler then those 3 but comm wear is the same as the Orion's
#6198
Originally Posted by laro
John Bull can you comment on the cg lowering mods
Good luck.
#6200
Tech Rookie
Originally Posted by bhambrent
I like the black rims on you tc4, who make them?
Thanks,
Thanks,
if you cab still find them
#6201
Setups for rubber on carpet?
Does anyone have a setup for rubber tires on carpet for the FT TC4?
Is the foam setup included with the kit pretty close?
Is the foam setup included with the kit pretty close?
#6202
Tech Rookie
Originally Posted by lem2
I want one also, but I hope Lunsford update this to the Factory Team TC4 screw kit, because the FT has some additional screws.
Getting my car this weekend!!! Woooohooooooo!!!!!!!!!!!!!!!!
Getting my car this weekend!!! Woooohooooooo!!!!!!!!!!!!!!!!
#6203
Originally Posted by DawgMeat1
http://www.rcscrewz.com/ 19.00 for the factory TC4
For another set screw package that are high strength steel and not Ti you can visit.
Hexcrews now has a FT TC4 set also. I requested this set via customer service on Wed. and they emailed me a link today for the FT set.
FT TC4 Hexcrews set
#6204
are the TC4 LIGHTENED STEEL OUTDRIVES the same size etc as the IRS ones? im sure they are but i just wanna check just incase
#6205
Working on my 3Racing SSG conversion kit. Looks pretty nice. We'll have to see how it handles when the rain stops!
#6206
Joey, As soon as you get to race it, please e-mail me some feedback. I'm probably gonna get a 3Racing chassis (looks nice and the price is right) Could you tell me how much weight the chassis conversion took off the car?
#6207
PAZ: Yes the IRS outdrives are a direct fit.
- DaveW
- DaveW
#6208
FTTC4:anyone have the sleeve to the ballcup that attaches to the steering from the servo slightly tuoch the driveshaft when steering left. i saw this when assembling car.
#6209
Tech Rookie
Originally Posted by gonzo416
FTTC4:anyone have the sleeve to the ballcup that attaches to the steering from the servo slightly tuoch the driveshaft when steering left. i saw this when assembling car.
#6210
Tech Rookie
Originally Posted by AKARA
Working on my 3Racing SSG conversion kit. Looks pretty nice. We'll have to see how it handles when the rain stops!