57LikesThe Speed Passion Thread
02-17-2011, 03:19 PM
#6571
Tech Champion
iTrader: (32)
Join Date: Aug 2001
Location: In a land of mini-mighty mental giants
Posts: 8,854
Trader Rating: 32 (100%+)
Awesome....locked end plates....and a cheap price. Bring on the hand out motor races once again!!!!
02-17-2011, 04:03 PM
#6573
02-17-2011, 08:44 PM
#6574
What functionality does the SP android app currently have?
02-18-2011, 03:22 AM
#6576
Has anyone experienced problems, with the capacitors on the GT2? I bought a used SP GT2, from a person here, and have a problem. I wired, and installed it in my '007, on Sunday, and I got FLAMES, and smoke! The only wiring, I did, was to solder the motor wires, so that shouldn't have had any effect. I have the 528 firmware, and had an experienced racer set-up the programming. Now, when I put it on the line..I addded throttle, and it stuttered...then burned! The ESC looks to be ok, as does the battery, BUT..the wires, for the capacitors are fried, and burned! Anyone have an idea what happened? I dont know if it was the ESC, or the caps, that are the problem, and am afraid to try anything, with it, now!
Dave
Dave
02-18-2011, 03:25 AM
#6577
http://www.amazon.com/gp/product/B00...ef=oss_product
Is that the same as what you are trying to use...? If that is the same...then someone said it does work.
I know Marc's 416 and 12th scale were using something similar like this on his car racing at the WORLD. Again...I cannot tell it is exactly the same spec but it looks the same to me.
Try it...
Is that the same as what you are trying to use...? If that is the same...then someone said it does work.
I know Marc's 416 and 12th scale were using something similar like this on his car racing at the WORLD. Again...I cannot tell it is exactly the same spec but it looks the same to me.
Try it...
![[[john]]'s Avatar](https://www.rctech.net/forum/customavatars/avatar25681_2.gif){kind=avatar}
02-18-2011, 06:18 AM
#6580
S120L
hi Guys, i just put together my S120L. im running a Speed passion GT 2.1EX SP 1 Cell 4.5T motor. and 1 cell. my track is open and fast, long straight
what would be a good starting point for Roll out, and ESC settings ? and with this ESC, do i need to run a booster batt ? Thanks.
what would be a good starting point for Roll out, and ESC settings ? and with this ESC, do i need to run a booster batt ? Thanks.
02-18-2011, 06:34 AM
#6581
how does the wiring look on these when wired up, cant really picture how it would look from the pictures on a-main hobbies.
02-18-2011, 03:34 PM
#6585
Ok round 2 what is the functionality of both apps