TLR TEN-SCTE 2.0 Kit Thread
#5596
Tech Elite
iTrader: (33)
http://www.amainhobbies.com/product_...ng-Gel-1-SheetSee post #5574 for the 3.0 RX box. I use double sided tape or shoe goo for ESC install. Or the kyosho gel tape works great and cushions the ESC.
#5597
Hey Casper or Ryan,I don't have alot of time to get to the track to test and tune and need to know if you have a good starting indoor setup for the 2.0. Any help would be appreciated. I will be running at Leisure Hours in IL and JCP in Indy. Thanks
#5598
I may start racing in Joliet as well I would also love a set up if possible. I have the dunford setup now
#5599
Hey guy's..I have been running the Pro 4600 on a med outdoor track with a 14 pinion,I just purchased a HD 4300 what would be a good pinion to start with?
Thanks Tommy,
Thanks Tommy,
#5600
#5601
#5602
Tech Prophet
iTrader: (34)
#5603
Keep the latest dunford? I ran it and lived it just not on clay yet.
#5604
I've been liking this set-up the first 2 weekends..
#5605
Tech Champion
iTrader: (168)
For the ESC, I mounted a Tekno ESC tray to my chassis (drilled and countersunk the chassis) and then you can screw the RX-8 to the tray and put a plastic wire tie around it for additional insurance.
#5606
Not real sure I used servo tape for rx8 and no Rx box is that crazy
#5607
Took my 2.0 out for the first time today...i didn't tune it as i am new to racing and not sure which way to go yet....anyway...so much easier to drive than my SC10 4x4...Truck is amazing!!
#5608
awsome thanks Casper ill order one of the new bodies, and yes i did cheers
#5609
Tech Adept
Casper
Your link does not work for:
Rear Motor Setup for TLR 22 1.0
Im running on a small, tight, high bit clay track and looking for a setup
Thanks
Your link does not work for:
Rear Motor Setup for TLR 22 1.0
Im running on a small, tight, high bit clay track and looking for a setup
Thanks
#5610