Kyosho Ultima RB6 & RB6.6 Car Thread
|
|||
#5702
Tech Master
iTrader: (77)
Uhm.. Tebo and the 6 looked amazing. But am I the only one that thinks there was some dirty driving in that race by the other guys in the front? Cav took one in the kiester, with no lube, 4 feet before the finish line. wth?
(edit: I spy gil losi jr, there at the end! )
(edit: I spy gil losi jr, there at the end! )
#5707
first run of my RB6 this past weekend. have had it build and ready for a couple months, just no opportunity to run it until now.
1st drive/meet, out of the box setup.. and did far better (7th in the Amain) than I ever did with my TLR 22 after countless changes. VERY happy.
1st drive/meet, out of the box setup.. and did far better (7th in the Amain) than I ever did with my TLR 22 after countless changes. VERY happy.
#5708
Servo Horn
I use the Kyosho LAW42 servo horns on both of my RB6's... Have had the same two servo horns for 2+years now (with KO RSX Response servo's), never skipped a beat and I run 3-4 days a week. R'Dub
#5711
in regards to the caster block/arm spacing, you will only use quantity one, 1mm shim towards the back of the block (if building per the manual with a neutral/middle front wheelbase). The inserts were specifically designed to have 1mm built into them already.
#5713
Tech Addict
iTrader: (1)
#5715