Tekno RC EB48.4 Thread
|
|||
#106
Hey guys, I'm looking to get back into racing and am getting into 1/8 E buggy. Does anyone know yet the differences between this buggy and the TLR 8ight 4.0 as far as driving goes? I like how the 8ight is said to be smoother and more planted than the eb48.3, but maybe thats fixed? Thanks for the insight.
#108
Tech Master
#109
Tech Addict
iTrader: (44)
Compared to the .3's that were there it looked settled with plenty of steering. I haven't been around the last few years since the original EB48 was offered to see the progression. It looked good enough to have me questioning my decision that I already made to pre-order a different brand.
Jeremy was the white one? His looked good also.
Jeremy was the white one? His looked good also.
#110
I copied this from an excel spreadsheet so the format is bit off, but it shows the FDR using 15 - 21 Tooth pinions for the EB48.1-3 and for the new gearing used in the EB48.4.
TEKNO FDR EB48-.3
Pinion - FDR
15 - 11.73333333
16 - 11
17 - 10.35294118
18 - 9.777777778
19 - 9.263157895
20 - 8.8
21 - 8.380952381
TEKNO FDR EB48-.4
Pinion - FDR
15 - 9.768
16 - 9.1575
17 - 8.618823529
18 - 8.14
19 - 7.711578947
20 - 7.326
21 - 6.977142857
TEKNO FDR EB48-.3
Pinion - FDR
15 - 11.73333333
16 - 11
17 - 10.35294118
18 - 9.777777778
19 - 9.263157895
20 - 8.8
21 - 8.380952381
TEKNO FDR EB48-.4
Pinion - FDR
15 - 9.768
16 - 9.1575
17 - 8.618823529
18 - 8.14
19 - 7.711578947
20 - 7.326
21 - 6.977142857
Last edited by suzukipro; 01-04-2017 at 07:10 PM.
#111
Tech Master
iTrader: (10)
I copied this from an excel spreadsheet so the format is bit off, but it shows the FDR using 15 - 21 Tooth pinions for the EB48.1-3 and for the new gearing used in the EB48.4.
TEKNO FDR EB48-.3
Pinion - FDR
15 - 11.73333333
16 - 11
17 - 10.35294118
18 - 9.777777778
19 - 9.263157895
20 - 8.8
21 - 8.380952381
TEKNO FDR EB48-.4
Pinion - FDR
15 - 9.768
16 - 9.1575
17 - 8.618823529
18 - 8.14
19 - 7.711578947
20 - 7.326
21 - 6.977142857
TEKNO FDR EB48-.3
Pinion - FDR
15 - 11.73333333
16 - 11
17 - 10.35294118
18 - 9.777777778
19 - 9.263157895
20 - 8.8
21 - 8.380952381
TEKNO FDR EB48-.4
Pinion - FDR
15 - 9.768
16 - 9.1575
17 - 8.618823529
18 - 8.14
19 - 7.711578947
20 - 7.326
21 - 6.977142857
I was running a 17t in my .3 and was going to run a 16t in the .4 but now this has me thinking i should drop to a 15t probably.
#113
Got my .4 body painted last night. I really like the looks of the new stock shell!
#115
ok dumb question should I build the car to the box setup or the one of the other setups it looks like my first race with it will be the SIC.
#116
I always build to box setup initially to test. I can then make changes from there and or try a new setup to compare. If you start with a "tuned" setup then you cannot compare it to "stock" setup for improvements etc.
#117
I just ordered my .4 and it should be in by next Wednesday! Excited over here!
#118
I copied this from an excel spreadsheet so the format is bit off, but it shows the FDR using 15 - 21 Tooth pinions for the EB48.1-3 and for the new gearing used in the EB48.4.
TEKNO FDR EB48-.3
Pinion - FDR
15 - 11.73333333
16 - 11
17 - 10.35294118
18 - 9.777777778
19 - 9.263157895
20 - 8.8
21 - 8.380952381
TEKNO FDR EB48-.4
Pinion - FDR
15 - 9.768
16 - 9.1575
17 - 8.618823529
18 - 8.14
19 - 7.711578947
20 - 7.326
21 - 6.977142857
TEKNO FDR EB48-.3
Pinion - FDR
15 - 11.73333333
16 - 11
17 - 10.35294118
18 - 9.777777778
19 - 9.263157895
20 - 8.8
21 - 8.380952381
TEKNO FDR EB48-.4
Pinion - FDR
15 - 9.768
16 - 9.1575
17 - 8.618823529
18 - 8.14
19 - 7.711578947
20 - 7.326
21 - 6.977142857
#120
My 48.4 test run today, nice and stable rear tire tracking compare to 48.3.