Team Losi JRXS Type-R
#6496
Tech Initiate
yes heat shrink is what i used... and a few bits of double sided tape in the right spots
#6499
Tech Lord
iTrader: (32)
It's "expandable braided shielding" that people use to dress up their wires when they do computer case mods. You know, back when people still used PC's? Anyway, it's everywhere. Here's an example, but I'd search around for better deals. I got mine at Micro Center in the "super nerd virgin" section of the store.
http://www.directron.com/ffr.html
http://www.directron.com/ffr.html
#6501
#6503
Tech Master
iTrader: (74)
http://precisionracingsystems.com/
Not sure in mm as I do everything in inches but for 13.5 foams you can use the 118 but you can only go up to about 54 teeth on the pinion. If you get the spur adaptor you can go with the 100 tooth. I use the 100 with a 51-54 pinion range. That seems high but I run the LRP motor which you gear higher than Novaks.
#6504
hey favain what pinion shoudl I run with the 98 tooth that you suggested? Do I also need the 108 too?
#6507
wow those are some big pinions! I think i just wait till I get to the track to buy them. I think the biggest I got is like a 43....
#6508
Registered User
ONE WAY
I'm running rubber tire / carpet - iassume the ONE WAY is the way to go.....
Anyone experience any negative side effects with regards to broken spures or other parts when using the ONE WAY?
Thanks!
Anyone experience any negative side effects with regards to broken spures or other parts when using the ONE WAY?
Thanks!
#6509
Tech Master
iTrader: (74)
yeah, I had a oneway completely lock up on me. I believe it's done. You can't do anything to unlock it. I believe at that point you just have to get a new one. When you get it you wanna lube it right away. I forgot to do this and may have cost myself a nice chunck of change.
#6510
yeah, I had a oneway completely lock up on me. I believe it's done. You can't do anything to unlock it. I believe at that point you just have to get a new one. When you get it you wanna lube it right away. I forgot to do this and may have cost myself a nice chunck of change.