Serpent S411
#3108
This is interesting as the rumor is that Tamiya is testing metal gears in their diffs, they can't take the mod power. Guess time will tell.
#3111
#3114
Tech Regular
iTrader: (21)
got it, like a moron I just went with the info I got that the le comes with the v2 and never compared it to the v1 da. I bought the car prebuilt and the rack was already installed, funny thing is that there is no anodizing on the top of the arms. Thanks for the clue in I will run the setup in the manual and order the v2. any tips on the v1 setup?
#3116
#3117
Tech Elite
iTrader: (109)
#3120
Tech Regular
iTrader: (21)
No, I bought it off someone on this forum who had flipped the arms but not installed the v2 rack, after running a couple weeks I was going through the car and cleaning and rebuilding. And I wanted to apply all the v2 mods and realized that the arms were flipped without the v2 rack. I put it back to stock per manual and that is when I noticed the play. Are others finding the tolerances tight or is the play normal ?
I will probably just by the v2 assembly and rebuild.
Other than the arms being flipped it had spacers added that put the rack at pretty much the same place it sets now, I am not sure it had any effect other than lowering the arms.
I will probably just by the v2 assembly and rebuild.
Other than the arms being flipped it had spacers added that put the rack at pretty much the same place it sets now, I am not sure it had any effect other than lowering the arms.