Team Associated TC5
#2656
Tech Fanatic
iTrader: (10)
Join Date: Apr 2006
Location: Sydney, Australia. St Ives RC Club.
Posts: 961
Trader Rating: 10 (100%+)
Originally Posted by Kevin Boyle
Thanks Brent,
I am looking forward to building the car this weekend
Kevin Boyle
I am looking forward to building the car this weekend
Kevin Boyle
Warwick.
#2657
Tech Fanatic
iTrader: (10)
Join Date: Apr 2006
Location: Sydney, Australia. St Ives RC Club.
Posts: 961
Trader Rating: 10 (100%+)
Originally Posted by RandyB
just looking through some pictures of the Reedy race and check this out
http://jbphotography.smugmug.com/gal...157255085-O-LB
Cavileri body, I may be crazy here but look at the front wheel wells. looks as though the body was mounted/ pulled quite a bit forward. Any comments on why or how this could effect handling?
http://jbphotography.smugmug.com/gal...157255085-O-LB
Cavileri body, I may be crazy here but look at the front wheel wells. looks as though the body was mounted/ pulled quite a bit forward. Any comments on why or how this could effect handling?
#2658
Originally Posted by B4Bandit
It's also because the body doesn't fit nicely... I had to do the same to my Stratus body.... either that or trim down my bumber.
#2659
Foam Setups
As promised, some foam setups from the team have been posted on the Associated website...enjoy!
http://www.rc10.com/racerhub/setup/0setups_tc5.htm
http://www.rc10.com/racerhub/setup/0setups_tc5.htm
#2661
Originally Posted by bigb11
do you really need the new chassis to run outdoors?
#2662
Originally Posted by BlueSilver
Hi Brent,
i am TeamDriver for Thunder Tiger in Germany, can u please send me some pictures, how i can install the O-Rings perfect?
U have a Idea how can make a Spool with the Front Diff, use SandPaper or a good glue :-)
Thanks for answering,
Marcel
i am TeamDriver for Thunder Tiger in Germany, can u please send me some pictures, how i can install the O-Rings perfect?
U have a Idea how can make a Spool with the Front Diff, use SandPaper or a good glue :-)
Thanks for answering,
Marcel
Here's a photo of how Juho has his o-rings installed on the top deck. They are located between the gold washer and the top deck.
Just snug them down. There is no need to over tighten them.
#2663
Team EAM
iTrader: (79)
Originally Posted by 51
As promised, some foam setups from the team have been posted on the Associated website...enjoy!
http://www.rc10.com/racerhub/setup/0setups_tc5.htm
http://www.rc10.com/racerhub/setup/0setups_tc5.htm
EA
#2664
Tech Elite
iTrader: (59)
Originally Posted by 51
Short answer, no. From a box stock TC5, the best investments you can make for asphalt racing are:
Gold Springs #3944 x 1
Blue Springs #3943 x 1
Silver Springs #3942 x 1
O-rings #5407 x 1
8 Washers #7336 x 2
M3x6 BHCS #31531 x 2
Start with this setup:
http://www.rc10.com/racerhub/setup/r...yrace_2007.pdf
With the stock chassis, running the o-rings on the top deck should provide more than enough flex to generate the proper traction on asphalt. However, the car may tweak a bit easier due to the lack of fixed top deck attachments. There are photos around the sites of how to install the o-rings.
Just ask if you have questions. Have fun!
Gold Springs #3944 x 1
Blue Springs #3943 x 1
Silver Springs #3942 x 1
O-rings #5407 x 1
8 Washers #7336 x 2
M3x6 BHCS #31531 x 2
Start with this setup:
http://www.rc10.com/racerhub/setup/r...yrace_2007.pdf
With the stock chassis, running the o-rings on the top deck should provide more than enough flex to generate the proper traction on asphalt. However, the car may tweak a bit easier due to the lack of fixed top deck attachments. There are photos around the sites of how to install the o-rings.
Just ask if you have questions. Have fun!
#2665
how about timmy heisers novak a main setup .. and timmy's 19t a main at carpet nats
please
please
#2667
Not that this has anythng to do with this thread but...
What brushless esc are you guys running. I need a new one. I am thinking the GTB Spread Spektrum or the LRP TC-Spec. What are you guys running?
What brushless esc are you guys running. I need a new one. I am thinking the GTB Spread Spektrum or the LRP TC-Spec. What are you guys running?
#2668
Originally Posted by wallstreet
how about timmy heisers novak a main setup .. and timmy's 19t a main at carpet nats
please
please
#2669
Originally Posted by bretzkej
Not that this has anythng to do with this thread but...
What brushless esc are you guys running. I need a new one. I am thinking the GTB Spread Spektrum or the LRP TC-Spec. What are you guys running?
What brushless esc are you guys running. I need a new one. I am thinking the GTB Spread Spektrum or the LRP TC-Spec. What are you guys running?
#2670
Originally Posted by STARSCREAM
isnt that with the prototype car????