Hot Bodies Cyclone
#7306
Super Moderator
iTrader: (239)
Originally Posted by pcar951
Where's the best place for Cyclone parts in the USA? Looking for... 3 racing, Jet racing, Square racing and Hot Bodies stuff. Any help would be great!!
#7307
Tech Elite
iTrader: (3)
Originally Posted by L.Fairtrace
Most of the jet and 3 racing stuff I would stay away from as the quality isnt great unforntualey. I bought into it at first casue its cool looking but dont buy any aluminum stuff from them that is functional like hubs and that stuff. The swaybar mounts are nice. All of the stuff they make for the drivetrain is heavy, adds up to 1 ounce rotating mass if you add the alum outdrives.
Last edited by kewdawg; 02-25-2007 at 01:14 PM.
#7308
Tech Elite
iTrader: (24)
everything I had bent slightly after only a few weeks, I ripped it all off after a couple weeks, denny stripped out a few things and had some bend also. One of the c hubs bent about 7 degrees.
Usually when something is to cheap to be true, its too cheap to be good. 18 bucks for alum knuckles is 32 dollars less than the cost of a Good set of alum knuckles from Talmale for my Xray. I looked for a long time and cannot find the kind of alum they use in jet and 3 racing stuff. That too me tells me they dont want me to know.
Usually when something is to cheap to be true, its too cheap to be good. 18 bucks for alum knuckles is 32 dollars less than the cost of a Good set of alum knuckles from Talmale for my Xray. I looked for a long time and cannot find the kind of alum they use in jet and 3 racing stuff. That too me tells me they dont want me to know.
#7312
Tech Elite
iTrader: (3)
Originally Posted by L.Fairtrace
everything I had bent slightly after only a few weeks, I ripped it all off after a couple weeks, denny stripped out a few things and had some bend also. One of the c hubs bent about 7 degrees.
Usually when something is to cheap to be true, its too cheap to be good. 18 bucks for alum knuckles is 32 dollars less than the cost of a Good set of alum knuckles from Talmale for my Xray. I looked for a long time and cannot find the kind of alum they use in jet and 3 racing stuff. That too me tells me they dont want me to know.
Usually when something is to cheap to be true, its too cheap to be good. 18 bucks for alum knuckles is 32 dollars less than the cost of a Good set of alum knuckles from Talmale for my Xray. I looked for a long time and cannot find the kind of alum they use in jet and 3 racing stuff. That too me tells me they dont want me to know.
#7313
Does any here know were I can buy hop up parts for the Cyclone?
#7315
Super Moderator
iTrader: (239)
Originally Posted by losi09
Does any here know were I can buy hop up parts for the Cyclone?
#7316
Tech Master
Originally Posted by pcar951
OK.... Any suggestions for the weak knuckles on the Cyclone?
Snowy.
#7318
Tech Master
iTrader: (2)
Originally Posted by dway100
Not sure if it has been mentioned yet, but Stormer Hobbies is selling the original Cyclone for $199.99.
https://www.ssl-stormerhobbies.com/c...0&showbig=6809
https://www.ssl-stormerhobbies.com/c...0&showbig=6809
#7320
Tech Master
This was the only place I could find.
http://www.corallyusa.com/specializedrc/bumperz.htm
Or, order from your LHS.
I got mine (2+ years ago) from www.pdubracing.com. But they list out of stock.
I guess next time I see one, I'll pick it up for myself.
Snowy.
http://www.corallyusa.com/specializedrc/bumperz.htm
Or, order from your LHS.
I got mine (2+ years ago) from www.pdubracing.com. But they list out of stock.
I guess next time I see one, I'll pick it up for myself.
Snowy.
Last edited by Essnowyt; 02-25-2007 at 05:43 PM. Reason: New info.