CRC 1/10 Pan Car
#3001
Tech Adept
Is it possible to run these types of bodies on the 10LE? Will it be impossible to drive? To be for track use but not racing. Only just for fun driving. Thanks.
1969 camero z28 (200mm)
1970 cuda (200mm)
1969 camero z28 (200mm)
1970 cuda (200mm)
#3003
Tech Adept
dumper: Fab! Thanks.
#3004
Tech Elite
iTrader: (71)
Is it possible to run these types of bodies on the 10LE? Will it be impossible to drive? To be for track use but not racing. Only just for fun driving. Thanks.
1969 camero z28 (200mm)
1970 cuda (200mm)
1969 camero z28 (200mm)
1970 cuda (200mm)
#3005
Tech Adept
iTrader: (12)
Hi i have had a look but cant find a 2s tekin setup. I was wondering if anyone can share a tekin rs pro setup for an le on large asphalt track (moorebank)running 10.5 with 2s. i have played around with the settings but would appreciate some speedy setups to start .rollout at 76mm
thanks
thanks
#3006
Tech Fanatic
iTrader: (37)
Hi i have had a look but cant find a 2s tekin setup. I was wondering if anyone can share a tekin rs pro setup for an le on large asphalt track (moorebank)running 10.5 with 2s. i have played around with the settings but would appreciate some speedy setups to start .rollout at 76mm
thanks
thanks
http://www.rctech.net/forum/electric...iscussion.html
#3007
Tech Fanatic
iTrader: (37)
Hello Guys,
The prototype has been cut and fitted!
These will include a CF forward stop with hardware but I have yet to cut that part.
I am hoping to have the first batch done by Friday so if you are wanting a CF battery tray for your GenX 10 Legacy chassis, Please send $20.00 each + $4.00 flat rate for shipping in the Continental U.S.
I can only take PayPal at this time so I will have to eat the fees myself. Oh well...
Please PM me for my PP address.
Here is a pic of the prototype.
I'll have more pictures of the tray installed in the chassis tomorrow.
The prototype has been cut and fitted!
These will include a CF forward stop with hardware but I have yet to cut that part.
I am hoping to have the first batch done by Friday so if you are wanting a CF battery tray for your GenX 10 Legacy chassis, Please send $20.00 each + $4.00 flat rate for shipping in the Continental U.S.
I can only take PayPal at this time so I will have to eat the fees myself. Oh well...
Please PM me for my PP address.
Here is a pic of the prototype.
I'll have more pictures of the tray installed in the chassis tomorrow.
Thanks Neil.
#3009
What are the benefits for the reversed servo vs the standard angled servo.
#3010
"These new reverse servo mount plates allow for more room to move the battery back and forth in the CRC Gen-X 10 and 10LE. The servo is now flipped to the front and mounted flat, lowering the CG and lightening the car. Also, more space is now open to put all the components inline and/or move the battery further forward."
#3011
Gen X10-LE set up info
Hey Guys,
I thought I'd post some set up info from my CRC WGT I ran at the US Indoor Champs over the weekend.
I TQ'ed and won the main with this set up:
2.01" tires front and rear
Long front arms
White front and side springs
side springs moved out to over side links
side tubes raised and 7K lube
30wt center shock with purple spring
4.5mm clearance all around
1.5mm droop in rear shock
.25mm droop front
1.25* camber
10* front blocks
inline axles
If you have any questions feel free to ask.
Here's a pic:
I thought I'd post some set up info from my CRC WGT I ran at the US Indoor Champs over the weekend.
I TQ'ed and won the main with this set up:
2.01" tires front and rear
Long front arms
White front and side springs
side springs moved out to over side links
side tubes raised and 7K lube
30wt center shock with purple spring
4.5mm clearance all around
1.5mm droop in rear shock
.25mm droop front
1.25* camber
10* front blocks
inline axles
If you have any questions feel free to ask.
Here's a pic:
#3013
#3014
Tech Addict
crc wgt
would like to here more on your setup? i am jumping from 1/12 scale to 1/10 thinking i like it more. when say white front springs what are you meaning and how high did you raise your damper tubes and did you raise both ends? whats the purpose of putting the side springs over the side links?
#3015
would like to here more on your setup? i am jumping from 1/12 scale to 1/10 thinking i like it more. when say white front springs what are you meaning and how high did you raise your damper tubes and did you raise both ends? whats the purpose of putting the side springs over the side links?
Some guys use the 1/12 kingpins and run .50 fronts.
I liked the feel of the bigger/longer spring.
The dampener tubes were raised 1/2" on the graphite side plates.
Then I mounted them on the top of the upper pod graphite plate.
The rear graphite side plates had to be raised to .65" in order to give enough room to move the side springs over the links. (you can use 5/8 standoffs and a washer).
To sum it up...
When I did this, the car would have alot of chassis roll, but wouldn't diff out or become upset in the turns on a high bite track. I can drive it like a 1/12