Jammin X1 - so close yet so far
#2911
Hello jammin owners I need some setup info for my jammin. I will be attending the gas champs in Columbus Ohio and I was wondering if someone can give me a nice setup for this track.The track is an indor track and I heard is was a tight technical track and the surface is hard compact clay. Any tips in diff oil, shock oil,tires, clutch set up etc... would be greatly apreciated!!
PS I dying to represent the jammin against all those 8ight's that will be there including my teammates!!!!!
thanks
Norman
PS I dying to represent the jammin against all those 8ight's that will be there including my teammates!!!!!
thanks
Norman
#2913
Tech Elite
iTrader: (7)
do you know what the jumps are like?
5k-10k-1k
1.5 degree toe out
ackerman, furthest to the rear
rear toe, 2.5 degree
hard clutch spring like what JFC said, you want snappy acceleration
proline CFs or Panther komodo 2s or gators
i think thats all i can give you without info about the jumps.
5k-10k-1k
1.5 degree toe out
ackerman, furthest to the rear
rear toe, 2.5 degree
hard clutch spring like what JFC said, you want snappy acceleration
proline CFs or Panther komodo 2s or gators
i think thats all i can give you without info about the jumps.
#2914
Hello jammin owners I need some setup info for my jammin. I will be attending the gas champs in Columbus Ohio and I was wondering if someone can give me a nice setup for this track.The track is an indor track and I heard is was a tight technical track and the surface is hard compact clay. Any tips in diff oil, shock oil,tires, clutch set up etc... would be greatly apreciated!!
If you like powering into corners i would go 7-7-2 and may change to 7-5-2 as the track breaks up.
If you like off-power then 5-7-2. Also go 5-5-2 as it breaks up.
Shocks I use 50F 40 R for Jammin BB shocks.
Hope it goes well. Show those Losi's whos boss.
#2915
Thanks for the info guys. I don't have any info as far as the jumps but i will put a setup together with the info you guys posted. I am sure it will work!!!
#2917
Originally Posted by jfc_tech
i second that.
#2918
Tech Elite
iTrader: (7)
http://www.nitrohouse.com/eng,_ofna_picco.htm
already the Jammin engines are on sale. they are priced well too.
already the Jammin engines are on sale. they are priced well too.
#2919
I hope this forum is not dying. I would shudder to think you guys are all driving Losi's.
I cant wait for the firts race meeting this weekend. My Jammin X1 is or has been lying diped in WD40 waiting. I ve used the holidays to change all my diff bearings. Going over every inch checking and making sure I'm ready.
I have a new set of light weight universals and the lightweight chassis that I am itching to install. I just wanna ride my current chassiss to the bone. Then for the full rebuild with new chassis and unis. My buggy will get a facelift. I also added some titanium rod ends.
I have been doing some extensive testing and comparisons using the Go21 7port engine and I must say its the best engine I owned so far. Believe me I've had a few. This engine is just awesome. I am using the same engine in both my truggy and buggy. The runtime and power delivery is just awesome.
I can give you direct comparisons.
At the track my truggy was being chased by a Mugen truggy with an RB C6, he couldnt catch me.
With the buggy down the straight I a guy with a WS7 chasing me. He couldnt close the gap. So there you have it. Ive taken out my Novarossi P5X and my Crono RS5 to use the GO engine. That should say alot.
I cant wait for the firts race meeting this weekend. My Jammin X1 is or has been lying diped in WD40 waiting. I ve used the holidays to change all my diff bearings. Going over every inch checking and making sure I'm ready.
I have a new set of light weight universals and the lightweight chassis that I am itching to install. I just wanna ride my current chassiss to the bone. Then for the full rebuild with new chassis and unis. My buggy will get a facelift. I also added some titanium rod ends.
I have been doing some extensive testing and comparisons using the Go21 7port engine and I must say its the best engine I owned so far. Believe me I've had a few. This engine is just awesome. I am using the same engine in both my truggy and buggy. The runtime and power delivery is just awesome.
I can give you direct comparisons.
At the track my truggy was being chased by a Mugen truggy with an RB C6, he couldnt catch me.
With the buggy down the straight I a guy with a WS7 chasing me. He couldnt close the gap. So there you have it. Ive taken out my Novarossi P5X and my Crono RS5 to use the GO engine. That should say alot.
#2920
Tech Champion
iTrader: (4)
unless someone give me free..i probably will do ..just being frank here
go go go jerseyboy. I have friends using the go 21-7 with his sacker(HB), he's one of the fastest in the straight... i've got a short look on the go engine. i like the head and the look of its design.. i mean P/S etc. its on unlimited edition here. im sure this engine rocks and at par if not surpass the other made engine..as u said.
im goin the opposite. im now concentrating my truggy now. im trying my 21B onto my X1crt. i put rest my 28 for awhile. i hope u doing well in yer coming 1st race. im sure butterfly everywhere
nervous + excited, i mean GOOD LUCK BUDDY!
continued here .... ooopppsss... u're talking about engine on truggy...
go go go jerseyboy. I have friends using the go 21-7 with his sacker(HB), he's one of the fastest in the straight... i've got a short look on the go engine. i like the head and the look of its design.. i mean P/S etc. its on unlimited edition here. im sure this engine rocks and at par if not surpass the other made engine..as u said.
im goin the opposite. im now concentrating my truggy now. im trying my 21B onto my X1crt. i put rest my 28 for awhile. i hope u doing well in yer coming 1st race. im sure butterfly everywhere
nervous + excited, i mean GOOD LUCK BUDDY!
continued here .... ooopppsss... u're talking about engine on truggy...
Last edited by jfc_tech; 01-18-2007 at 01:04 AM.
#2921
GOOD LUCK BUDDY
Hope you enjoy my forum as well.
I'm also concentrating on my truggy alot. I am very interested in purchasing the BCE J2 chassis and want to do the small spur conversion. I emailed BCE but they informed me that do not export out of the US at this time. Real Bummer seems they only want to supply the US racers. The guy says if I can get someone in the US thay will send it to him and I can get it from him.
Bummer dont know anyone in the US that can do this for me.
I think I'll just get another pro chassis. The problem is to get the competitive edge the J2 BCE chassis is the way to go.
#2922
Tech Regular
iTrader: (5)
Hello everyone, just joined the boards figured I would say hello to my Fellow Jammin' racers.... My current setups are Jammin X1-CR FTE kit, no motor yet, actually UPS just delivered it 15 minutes ago, and a Jammin' X1-CRT with RB WS7 2 and Jammin' JP-3 pipe... Spektrum DX 3.0, so far so good with all my products, and I am extremely happy with my choice to go with Jammin'. Hope to talk to everyone in here more.
-Brandon
-Brandon
Last edited by Euro Stealth; 01-23-2007 at 06:53 AM.
#2923
Tech Regular
Originally Posted by Euro Stealth
Hello everyone, just joined the boards figured I would say hello to my Fellow Jammin' racers.... My current setups are Jammin X1-CR Pro kit, no motor yet, actually UPS just delivered it 15 minutes ago, and a Jammin' X1-CRT with RB WS7 2 and Jammin' JP-3 pipe... Spektrum DX 3.0, so far so good with all my products, and I am extremely happy with my choice to go with Jammin'. Hope to talk to everyone in here more.
-Brandon
-Brandon