towertsk

iTrader: (6)

Didn't get the manual, but should be able to find it online and print. I'll be running it at an indoor clay high bite surface SDRC Raceway. Will the stock setup be good for those conditions.

trixter91

iTrader: (4)

What pinion do I want with a 1900kv motor. I have a 20 tooth. Is that to much.

trixter91

iTrader: (4)

Also are u guys using a 270mm sensor wire .

pimpedaccord

iTrader: (25)

Your gonna have to dremel the flat closer to the motor.

pimpedaccord

iTrader: (25)

15 or 16t pinion. Yes on the 270mm if you are running the batt back.

trixter91

iTrader: (4)

Cool, thanks. Are there any mods im gonna want as im new to ebuggy.

dhickman

iTrader: (7)

Aluminum servo saver top

trixter91

iTrader: (4)

Do u have a model number.

Dan.J

iTrader: (21)

TLR244021
http://www.amain.com/team-losi-racin...Product-Feeds&

MasiisaM

iTrader: (1)

Im going to try RM surf city set up and it looks like i have everything to do it except the "8ight T 3.0 caster blocks spaced forward."...Does anyone know what part that is?

trixter91

iTrader: (4)

Thanks

Brian Miskolczi

iTrader: (162)

Truck front spindle carriers TLR244016

NickTheGreek

iTrader: (1)

A brother is ready to get his bash on.....
I might even decide to slick the hair back, throw on the wife beater n start slappin' it down with hop ups....Get my slap on.

maddog9

iTrader: (30)

You will need to shim the caster. I used a scte steering rack bearing. I put the longer screw through the back and the short screw up front.

rcmike

iTrader: (40)

Any must do or improvements for a 3.0 -E truggy ? Thx