Yokomo_Ant3

iTrader: (29)

How are you fitting 4mm of shims in total for the front wheelbase Mike? And also, what did you find using no sway bars did?

Thanks,

Antoni

syndr0me

iTrader: (32)

Congratulations on the win, Mike, your car looked fantastic.

A couple of questions:

How wide do you run your car? Doesn't the HB typically run pretty narrow?

Did you try an LTC-R at the race? Why'd you end up with the speed6?

Yokomo_Ant3

iTrader: (29)

Widths are on the setup sheet, 187 front, 188 rear. Mike is only using 1D of arm sweep, so a lot less than kit.

EAMotorsports

iTrader: (79)

Mr. Haynes.....AWESOME job for the 2nd race in a row! You drove a smart race and awesome win! You going to the Nats?

EA

syndr0me

iTrader: (32)

Ah, I missed that, thanks.

goin2drt

iTrader: (77)

Where can I get the 1.1 mm 3 hole pistons? Also what does having so little (2mm) of droop do? I run 8.5 mm of course on a different track. I was just wondering.

Mike Haynes

iTrader: (2)

They are losi type r ends, perfect fit for the hb ballstud, yes no slop

I have a normal 1 degree block dremeled to fit on the inside, it has a different offset
Thanks, i ran my mod car more narrow for grip, but wanted stability for the stock car. The ltc was making the car very nosy and a bit hard to handel, so i swapped it out for stability sake.
All i kept thinking was go slow dont wreck lol....no carpet nats for me, i'm going to go to the superstock race in NM later this month then im done traveling till the paved nats.
I have schuie 3 hole pistons in mine, and just drilled out the holes larger. My droop is measures in mm over ride height not total uptravel, so its not too much more...basically just keeps the car flatter in tthe chicanes.

Hi-LowBlow

iTrader: (1)

Great job Mike!!

k_bojar

iTrader: (30)

Hey mike - who's upper bones are you using in the rear?? If it's in the setup sheet, I apologize can't see the setup on my phone

Are the the HPI pro-d ones??

Mike Haynes

iTrader: (2)

I have the cyclone 44mm steel in rear and top 46mm steel in front. Top pin retainers all around

SammyZ

iTrader: (138)

besides the invention of yokomo, you are the greatest thing that has happened to R/C.

san.

iTrader: (61)

Thank him with a Factory Team Contract.

Mike has helped me a great deal with my TCX @ Horsham. The guy is an ideal ambassador for HB/HPI.

I'm sure Alex and Jerry can agree as well.

Mike Haynes

iTrader: (2)

Matt W

Hey Mike,

Which spec r gears diffs r u running in your tcx and what mods did you have to do to make them work?

Congrats by the way!!

dameetz

Has any of you ever use 6 degs caster c hub? I m asking because recently I ordered 4 sets of c-hubs part #73518(4 deg caster) from one of the HK online shop, strangely all of 'em contain 6 degs caster c-hubs. If I use it what changes in handling am I expecting?