Durango DEX210 Thread
#4936
FYI, Amain has the rear shock mounts and slipper pads in stock!!!
#4938
Yes but you need to put the battery stop behind the lipo so it does not slide back.
#4941
my dex is extremly forgiving and easy, jumps nice. good tracting in the rear, and good steering. no exessive understeer
I run JC rips on the front and proline holeshot on the rear, you could do with some kind of suburbs. I think your track has a bit more bite by the looks of your vid.
#4942
mine is race ready around 1720 grams ( fullsize 5600mah 50C stickpack )
#4943
Tech Fanatic
iTrader: (4)
like this, the fullsize stickpack all the way upfront. a few foams in the back to fill up the space, with LP servo
my dex is extremly forgiving and easy, jumps nice. good tracting in the rear, and good steering. no exessive understeer
I run JC rips on the front and proline holeshot on the rear, you could do with some kind of suburbs. I think your track has a bit more bite by the looks of your vid.
my dex is extremly forgiving and easy, jumps nice. good tracting in the rear, and good steering. no exessive understeer
I run JC rips on the front and proline holeshot on the rear, you could do with some kind of suburbs. I think your track has a bit more bite by the looks of your vid.
We have AKA rebar handouts and I was thinking about rips/ribs in the front.
What other fronts do people use on clay?
Built the car now and seems real soft in the front, not quite used to that.
Is the set up done on the stock springs as he didn't have any others or was that what he came up with?
#4944
Tech Regular
iTrader: (4)
gearing
Finally got my 210 all put to gether, now just looking for a gearing set up for a 13.5 and a 10.5 motors. now just running the standard kit 87tooth spur gear. I believe taht it is a 48 pitch? now looking for a pinion combo for it.
Thanks
Paul
Thanks
Paul
Last edited by Redwings; 03-21-2012 at 06:04 AM.
#4945
For the 10.5 boosted I was running 25/84
#4949
R/C Tech Elite Member
iTrader: (520)