Car wont roll.
 

My car hit some type of bumb about a week ago or a little more. The Spur gears were stripped and the engine mounts were knocked loose. That was all of the visable damage and i fixed all of that today. I started my car and it wouldnt move. I hit the gas the engine revved and the exhuast came out and all. I did that for maybe a min to see if something would catch but it didnt. Its like the brakes are engaged at all times. Thanks for any help with this. BTW, i ever took apart my front and rear differntial housing's when i put everything back together and fixed those up so that is not a problem. Had the car since april and now this

it wouldnt go so you kept revving it?? whatever was wrong wasnt going to fix itself.. :lol:

anytime you crash or hit a bump, whatever, you should totally disassemble the car to find out what all is damaged. I'm sure that if you do this you find the problem.

New spur gears are on there right. Sounds like they might be too tight. See what can roll and what cant. It should become pretty obvious pretty quickly.

i feel so stupid. i changed tires and put them on to tight :/

put some spacer behind the hex pin and bearing will help on your over tighten problem.

Make sure you didn't toast the clutch shoes when you were revving it for that one minute.