r40 pulley's ??
#1
r40 pulley's ??
everytime i race my side belt comes off, and i think it is because of the pulleys, i want to be able to finish a race with all 4 wheels, intead of two. does anybody know if they have pulley's out there taht are better, maybe have bigger walls?? if you do can you tell me where i can find them.
#2
maybe you need more belt tension?
#3
yah, but i have it has low or as tight as it will go, and it still falls off every race.
#4
Originally posted by goldenboy
yah, but i have it has low or as tight as it will go, and it still falls off every race.
yah, but i have it has low or as tight as it will go, and it still falls off every race.
#5
Regional Moderator
iTrader: (9)
Maybe its time for a new belt. If you have it all the way down and its still falling off, thats a belt problem, not a pully problem.
If your car is new, then you may want to give HPI a holla and let them know about your problem. If your car isn't new, try a new belt.
Good luck.
If your car is new, then you may want to give HPI a holla and let them know about your problem. If your car isn't new, try a new belt.
Good luck.
#6
or maybe you did not put the correct pulley on when u built it
#7
yah my belt is pretty ragged, i will try that
#8
Check the front pulley!! If you have the 22T pulley on the belt is very loose. Put the 23T on if this is the case.
#9
i checked it and it says 22-23, so what does that mean lol, how else would i be able to check with out counting them indivdually
#10
i have the 23t
#11
Originally posted by goldenboy
i have the 23t
i have the 23t
#12
alright... i dont feel like starting a new thread so do you know anywhere that sells titanium pivot balls for the r40, i snapped one of mine right in half a week ago and the rod stayed in the a-arm so iit kinda screwed me that whole day, but if you do that would be great! the size is 7.9x18mm, weird.
#13
Originally posted by goldenboy
alright... i dont feel like starting a new thread so do you know anywhere that sells titanium pivot balls for the r40, i snapped one of mine right in half a week ago and the rod stayed in the a-arm so iit kinda screwed me that whole day, but if you do that would be great! the size is 7.9x18mm, weird.
alright... i dont feel like starting a new thread so do you know anywhere that sells titanium pivot balls for the r40, i snapped one of mine right in half a week ago and the rod stayed in the a-arm so iit kinda screwed me that whole day, but if you do that would be great! the size is 7.9x18mm, weird.
#15
yah i have heard about the mugen ones, but where i work we sell them for 115$ and that is a lot of money, because it comes with the whole set. is there a place where i can order them single or a least a pack of 2??