serpentracer1

Chris I deal with Lee also Great guy to talk to Ive got a Murnan and it rocks Im going to have him get me another one this time a Turbo 3pt cause they are roar legal now.I can say nothing but good things about Lee at Winners Circle and Murnan Modifieds motors.

Derby Bros Racing

iTrader: (7)

[b]ok guys help me out...

i need to know which parts fit and what.
i'm planning on bulletproofing my car the best i can so i hope you guys can help me...

1. which dog bone will fit the 710? will the 835 dog bones fit? i want spring steel.

2. is there any hardened shock shaft available? will the 8th scale shock shaft fit the 710?

3. i don't care much about the weight so i want to add titanium pivot balls on my 710. what titanium pivot ball will fit the 710? i need something that is available now

4. i need to double my rear shock tower. does anyone know where i can get this right now

5. is there any spring steel axle available that will fit the 710?

sorry for asking too much in one post. i hope you guys understand.

thanks in advance for your help[b]

sparksy

iTrader: (14)

1. The 835 front dogbones fit all round

2. The shock shafts are all the same size throughout serpent's current cars. With the front shafts shorter than the rear. So yes the 8th scale shafts will fit.

3. I have seen Titanium pivot balls on Ebay.

4. Try the shop you got the 710 from.

5. The front springsteel outdrives from the 705/835 fit with a little trimming. The front spring steel axles from the 705 will fit all round.

Derby Bros Racing

iTrader: (7)

thanks a lot for the quick response.
i do have some questions though.

1. this one is ok...

2. so the 950 front and rear is what i need for the shock shaft? are they the same material or stronger?

3. this one is ok...

4. ive tried the shop i got my 710 from... no luck. any other places to get a rear shock tower??

5. did you mean the 835 needs a little trimming and the 705 is ok? i mean, do the 705 spring steel axles fit with no modification?

thanks again in advance.

InitialD

To be specific, the 950/R, the 835 and the 705 shares the same identical shocks as the 710. So that is why they will fit !

Just a word of caution. You need to get the keyed type shock shafts (909442 for front and 909444 for rear). Not the older threaded ones (although they are identical lengths to the front and for the rear of the 710) as they are for the Serpent older cars (Impulse Streetspec, Impact and the Vector).

Be careful if you come across the titanium pivot balls for the 705 as they may be slightly longer. Besides, Julius mentioned that titanium pivot balls will cause glass filled plastics to wear faster.

sparksy

iTrader: (14)

4. No idea.. you could look at a few of the online stores.

5. I'm 99% sure they are the same item. They are too long ane need to be shortened. I mentioned them as 835 parts as thets what I have them for. I've never had a serpent 200mm before the 710.

InitialD

As I mentioned, there are only 909442 (front) and 909444 (rear) shock shaft part numbers for 950, 835, 705 and 710 !

I think you are confused here... sparsky mentioned that the 835 dogbones (they are only available in Hudy spring steel) will fit fine on the 710. The 705 dogbones (whether spring steel or not) will not fit.

The one way outdrive of the 705/835 (or even the XRay or the Mugen one) will fit on the 710. This includes the lightened one way outdrive for the Impact which will fit nicely on the 710.

HOWEVER, when you do this on the 710, you will not have the ability to lock the one way unit to make it into a solid axle front.

The front wheel axles of the 705 (also the same as the Impulse Streetspec / PRO) will fit the 710 all around as it is the same part. The 801215 is normal steel while the 801214 is the Hudy spring steel one.

Hope that is clear.

ammdrew

iTrader: (25)

here is the finals body for winternats, before color is added

ammdrew

iTrader: (25)

and the nose..

Sow&Steady

Actually they can, they just don't want to look into doing it.

Also, Unc Aw, Yok folks and Shariman's systems are the latest ones that directly support personal transponders.

Sow&Steady

Chris, thanks for the link. I'll check it out.

Sow&Steady

Modeller, you're right ... PM response almost immediate! Now THAT'S customer service

Cool avatar by the way ..

crashed_1

Saw some folks already using em @ one of the races @ Titiwangsa....

Sow&Steady

My point exactly

That must be the new system they used for the recent electric race right? Maybe it was run using Yok's system.

quozl

Just get your club a copy of Slyfox we've been using it at our club with personals for the past 3 seasons. Used and proven at IFMAR world championship, AARCMCC State and National titles, FAMAR titles and numerous other club and national events in Europe and the USA. Simple and easy to use and setup any racing from club races to National, FEMCA and IFMAR titles. Check it out at
http://www.genisys.net.au/Quantum/

Tell Randall I sent you.

Cheers Alastair