Rc10ntc3
#1336
Tech Champion
iTrader: (5)
Stefan
Stefan, the bodu is going to be the next hottest body in Nitro touring class. It is a 200mm version of the Parma X20 body. The 190 version is already considered to be a killer body by two world champs and several National Champs. Our testing shows thatcompared to a Stratus, it has more high speed turning and changes direction quicker as well. OB42TC3 tried my beat up practice body and liked it immediately. Then that evening we gave him a body to spray bomb for Sunday and he takes TQ away from me with it
But, thats cool!!! With that body on he got the TQ and the A-main win and I held the fastest single lap in 5-qualifiers and the fastest lap in the A-main. So we are happy with it!!!
But, thats cool!!! With that body on he got the TQ and the A-main win and I held the fastest single lap in 5-qualifiers and the fastest lap in the A-main. So we are happy with it!!!
#1337
Thank you Ray
#1338
BTW
is anybody here interested to get a fully hopped up NTC3 with VERY low miles on it?
I bought this car, built it, but I never actually raced it. All it has been through is a couple of setup runs and two 5 minute qualifiers. For some reason, I always go back to my Mugen when the main comes along :-)
Here is what I got:
- NTC3 rear exhaust kit
- Kawahara centax
- GH chassis
- Mugen tank
- dual chamber pipe
- one way
- full grapite kit
- shiny CVD's
- clamping alu wheel hubs
- stainless steel , 1/2 inch long on all top side points ( no stripping threads)
- center aluminum bulkhead
- full spring set
- extra diff, still in bag
- light 2nd gear housing, still in bag
- tranny case, still in bag
etc, etc, etc.
All the parts that have been replaced are still there.
The car is fast as h..l, it just doesn't fit my driving style.
I know, this belongs to the swap thread, but the NTC3 nuts are all here
If you are interested, let me know.
I will take some pics tonight.
I bought this car, built it, but I never actually raced it. All it has been through is a couple of setup runs and two 5 minute qualifiers. For some reason, I always go back to my Mugen when the main comes along :-)
Here is what I got:
- NTC3 rear exhaust kit
- Kawahara centax
- GH chassis
- Mugen tank
- dual chamber pipe
- one way
- full grapite kit
- shiny CVD's
- clamping alu wheel hubs
- stainless steel , 1/2 inch long on all top side points ( no stripping threads)
- center aluminum bulkhead
- full spring set
- extra diff, still in bag
- light 2nd gear housing, still in bag
- tranny case, still in bag
etc, etc, etc.
All the parts that have been replaced are still there.
The car is fast as h..l, it just doesn't fit my driving style.
I know, this belongs to the swap thread, but the NTC3 nuts are all here
If you are interested, let me know.
I will take some pics tonight.
#1339
I'm interested! How much? how about a trade with a Serpent Impace M2 4WD? email me
[email protected]
[email protected]
#1340
Stefan, How about engine & electronics, any included? I am also interested. Thanks.
#1341
Sorry guys,
no electronics. I had all digital servos in it which I'll keep as backup.
I do have a brand new, never turned RB X12, SG shaft, 3 port, standard plug that I could sell with the car.
I forgot to mention, that the car also has the RPM bumper and 2 shoe and 3 shoe clutch with a bunch of pinions.
The Kawahara Centax has 25 and 26 teeth second gear pinions, for first gear, the original AE pinions work.
The Centax also comes with the small flywheel and the lowered motor mounts.
So, if I add only the major upgrades up:
-Car $ 275
- Centax $ 100
- Chassis $60
- Pipe $ 50
- Graphite kit $50
- Spring set $30
________________
it comes to $ 565
I'd like to get $400 for the car and $150 for the engine.
Sounds fair?
Super K, I didn't want that Impact for my dyno and I still don't want it now.
How long have you been trying to sell it? 6-8 month?
I do have a brand new, never turned RB X12, SG shaft, 3 port, standard plug that I could sell with the car.
I forgot to mention, that the car also has the RPM bumper and 2 shoe and 3 shoe clutch with a bunch of pinions.
The Kawahara Centax has 25 and 26 teeth second gear pinions, for first gear, the original AE pinions work.
The Centax also comes with the small flywheel and the lowered motor mounts.
So, if I add only the major upgrades up:
-Car $ 275
- Centax $ 100
- Chassis $60
- Pipe $ 50
- Graphite kit $50
- Spring set $30
________________
it comes to $ 565
I'd like to get $400 for the car and $150 for the engine.
Sounds fair?
Super K, I didn't want that Impact for my dyno and I still don't want it now.
How long have you been trying to sell it? 6-8 month?
#1342
I also have an AE starterbox with two 3000 stickpacks.......
#1343
Originally posted by Manticore
your comment is misleading. Ah10 is talkin about same engine class and same model scale.
If you are talking about friction points, yes TC3 is the champion. but no competition so far for the less frction points !!
we are looking at actual performance.
your comment is misleading. Ah10 is talkin about same engine class and same model scale.
If you are talking about friction points, yes TC3 is the champion. but no competition so far for the less frction points !!
we are looking at actual performance.
Then 3-belt=
.98 * .98 * .98 * .98 * .98 *.98 *.98 = .868
Shaft 4WD=
.98 *.98 *.98 = .941
That's a 7.3% power edge; that's the difference between 1.25 HP and 1.35 HP
That's not to say an MTX can't be competitive, set fast laps, win races etc. There's no doubt though that unless the laws of physics are different where you live that the NTC3 would always be the fastest in a straight line.
Last edited by OB42TC3; 09-09-2002 at 10:07 AM.
#1344
Re: OB42TC3
Originally posted by stefan
thanks mutha.....
thanks mutha.....
#1345
Mee too
#1346
I rather drive .868 to the checkered flag than .941 for 5 minutes
#1347
Originally posted by stefan
I rather drive .868 to the checkered flag than .941 for 5 minutes
I rather drive .868 to the checkered flag than .941 for 5 minutes
#1348
Originally posted by OB42TC3
The point I am trying to get across is that with the same amount of power, the NTC3 will always be putting more of it out at the wheels. Say each friction point is 2%,
Then 3-belt=
.98 * .98 * .98 * .98 * .98 *.98 *.98 = .868
Shaft 4WD=
.98 *.98 *.98 = .941
That's a 7.3% power edge; that's the difference between 1.25 HP and 1.35 HP
That's not to say an MTX can't be competitive, set fast laps, win races etc. There's no doubt though that unless the laws of physics are different where you live that the NTC3 would always be the fastest in a straight line.
The point I am trying to get across is that with the same amount of power, the NTC3 will always be putting more of it out at the wheels. Say each friction point is 2%,
Then 3-belt=
.98 * .98 * .98 * .98 * .98 *.98 *.98 = .868
Shaft 4WD=
.98 *.98 *.98 = .941
That's a 7.3% power edge; that's the difference between 1.25 HP and 1.35 HP
That's not to say an MTX can't be competitive, set fast laps, win races etc. There's no doubt though that unless the laws of physics are different where you live that the NTC3 would always be the fastest in a straight line.
Last edited by Data; 09-09-2002 at 12:32 PM.
#1349
are we talking about static or kinetic friction? I was under the assumpiton that friction was only the greatest once the object initialy starts to move(static)...afterwords the coeffeicent of friction is reduced (kinetic)...either way cant we all just get along
#1350
I agree - it amazes me how much the TC3 thread keeps getting changed to a "compare TC3 to XXXXX" thread. . .
I don't go to those other (cars') threads, even though I have a GT4. . .and if I did, I wouldn't be bashing them. . .
oh well. . .it's all in fun I mean, we're adults playing with toy cars for bowling trophies! heh heh
I don't go to those other (cars') threads, even though I have a GT4. . .and if I did, I wouldn't be bashing them. . .
oh well. . .it's all in fun I mean, we're adults playing with toy cars for bowling trophies! heh heh
Last edited by Boomer; 09-09-2002 at 02:01 PM.