JConcepts
#271
Good luck to everyone going to the clash this weekend. Make sure you say high to Ryan Maifield. This guy is a true class act. We ran at the "Fall Brawl" this weekend in Myrtle Beach, SC. Ryan locked up Truggy and Buggy. Afterwards he gave his motor for winning buggy away to a little guy at the track and he also gave his $300 for winning Truggy away as well.
Kudos to Jason, Allison, and Andy for providing excellent products backed by stand up people. People could learn alot from JCon!!!!!!!
Also, the new JCon rubber and foams coming out a SUPER SWEET!!!!!! Make sure to check some out.
Kudos to Jason, Allison, and Andy for providing excellent products backed by stand up people. People could learn alot from JCon!!!!!!!
Also, the new JCon rubber and foams coming out a SUPER SWEET!!!!!! Make sure to check some out.
#273
Andy, or anyone for that matter; has anyone run the bar codes on their 1/10 truck? I picked up a set today and was wondering how to mount them as they are directional and if you have run them on all 4 corners or just the rear? If not on the front, what tire(s) then? And if you do run them on the front, what foam?
Thanks JR Mitch
#274
JR, can you call me when you have a moment.
Thanks,
Dave Leikam
678-793-1544
Thanks,
Dave Leikam
678-793-1544
#275
#276
I ran the bar codes on 1/10th scale truck last weekend (at the Clash) and all I can say is awsome! To mount them the large Y's on the outside worked the best. I ran them with DD's on the front but we just didn't have time to try them on all 4 corners. I'm hoping to test with them on the front soon, I think thay will be just as good or better than DD's.
Thanks JR Mitch
Thanks JR Mitch
#279
Tech Master
iTrader: (14)
I ran the bar codes on 1/10th scale truck last weekend (at the Clash) and all I can say is awsome! To mount them the large Y's on the outside worked the best. I ran them with DD's on the front but we just didn't have time to try them on all 4 corners. I'm hoping to test with them on the front soon, I think thay will be just as good or better than DD's.
Thanks JR Mitch
Thanks JR Mitch
thanks, JR. I ran them the next day after i bought them on all four corners on my gas truck, with the stock foams in all 4. They worked really well up front, even with the firm foam. I was really impressed how well the traction was, they were a little loose on entry, but the forward bite was retardedly high!!! wheelies all over the place!!!!!
Let me know what you come up with in testing!!!!!!
#280
Tech Adept
My new body from KustomRCGraphics.com Thanks Larry
#282
#283
Just wondering do you guys know when there will be a J Concepts body available for the Hot Bodies D8?
Thanks in advance
B.
Thanks in advance
B.
#285