f1larry

iTrader: (22)

You ordered the wrong one. You probably ordered the TB02 spur gear. The one you need is part #53665 TT-01 Spur Gear Set (55T/58T)

SerpentCT4S

iTrader: (95)

I just got a TT01 Type E. I want to get some upgrades for it.

Here is what I have planned:
-graphite upper deck
-front and rear sways
-heat sink
-alum shaft and joints
-bearing set
-alum steering
TRF shocks
-alum locking wheel hubs

What else is good to get? Does anyone make a lower graphite chassis?

IndyRC_Racer

iTrader: (9)

3racing makes a complete chassis for the TT-01.

SerpentCT4S

iTrader: (95)

Ok, do I order directly from 3Racing?

stocker

iTrader: (2)

Take note that the TT01E steering is different (better) that the TT01/TT01D/TT01R.

SerpentCT4S

iTrader: (95)

Yes, I am aware they are different. I have the right part number though.

mr crawly

sweet broo thanks knaw my car is fast as hell take off is slow but it works

IndyRC_Racer

iTrader: (9)

Here is the link to 3racings website - (http://www.3racing.hk/main.php)

I have never ordered anything from 3racing before. I have no idea how good their customer service is. I do know that they have been making aftermarket parts for many different cars for quite some time. Back when the Tamiya F201 was still available, 3racing made one of the better carbon chassis upgrade kits for that car.

You can find the 3racing TT-01 chassis available on ebay as well. I believe that there are 2 different chassis kits, one for the TT-01E and one for the TT-01. Here is a link to a TT-01 & 3racing search I did today (http://shop.ebay.com/items/__tt-01-3..._sopZ12QQ_scZ1)

Hope this information helps.

Wardy

Ok i've read through the gearing threads but i still have a question, can i fit larger pinions (more than 28 teeth) to a 55 tooth spur? As I don't fancy doing the 52t spur conversion.

Also are the gears 48 pitch or not? And are they only .6?

Great forum by the way and thanks for any help.

RaceBucks

iTrader: (6)

The 28 tooth pinion is the largest that will mesh with the 55 spur in the stock motor mount. Several folks have gone to adjustable mounts from 3rd party makers, but the 28T is the largest using the Tamiya mount.

The gears are not 48 pitch, they are the metric 0.6 pitch. HPI came out with a nice set of 0.6 pinions.

Wardy

Thanks for the fast reply.

toomany

iTrader: (10)

DOES ANY KNOW THE PART NUMBER FOR THE LONGER AXLE SHAFTS AND HEXES THAT CAME ON THE ENZO.

liquidular

iTrader: (1)

I have just found this joy of drifting thru a fren of mine. Both of us are newbies.

I went and bought the Tamiya TT01-type E RTR model without the Drift Specs. On top of that I also purchased a set of drift tires from Tamiya.

What are the main recommendations for 1st time upgrades? I am totally lost at the moment!!

function>form

iTrader: (50)

i got my yeah pack in there by loosening up the screws that the battery strap clips go into,think it was about one turn on each and it was snug...

d1nzfe

hi,can i know where did u buy the cover from?