WRC Racing STX EP touring car
#106
hi guys on the FaceBook look up US : WRC Racing RC Team S.E.Asia and Aust . you can see a build blog one of our top drives did for us
hope this helps plus we are trying to get more people interested
we will be doing a F-ONE 180 build blog shortly as well . just remember neweerc can now help you out with stock of theis great and very easy car to drive STX
hope this helps plus we are trying to get more people interested
we will be doing a F-ONE 180 build blog shortly as well . just remember neweerc can now help you out with stock of theis great and very easy car to drive STX
Last edited by devilracer23; 03-14-2013 at 07:18 AM.
#107
New pistons are availlable now.
Now they have two or three holes to choose from.
Now they have two or three holes to choose from.
#108
Would love to get me a bmw but seems i cant buy one in the U.S.
#109
I will check the possibilities.
Here is a new video of our testrun on Friday. Again it was faster than with previous cars
Testsession II
Here is a new video of our testrun on Friday. Again it was faster than with previous cars
Testsession II
#110
Tech Adept
So no news from your side???
last sunday my first race with 13.5 no timing class, at my local track in Livorno -Italy - (ussualy i'm running 13.5 boost against 10.5 boost) and i won against xray, yokomo and team magic.
The set up of the car was, and is, fantastic, now i'm waiting the first Italian championship race next 21st april. Let's cross the finger!!!!!!!!!!!!
last sunday my first race with 13.5 no timing class, at my local track in Livorno -Italy - (ussualy i'm running 13.5 boost against 10.5 boost) and i won against xray, yokomo and team magic.
The set up of the car was, and is, fantastic, now i'm waiting the first Italian championship race next 21st april. Let's cross the finger!!!!!!!!!!!!
#112
I was wondering about the hinge pin mounting. It looks like a single screw holding the mounting block to the chassis. On a hard hit I'm wondering if the block moves ...
The car also reminds me of a Kawada.
I'll be looking for a new car this fall ... this might be it.
Looking at the 2nd test session the car looked outstanding. Wish I was there to know track conditions and tires used but still ... it looked great ! (good driving too)
The car also reminds me of a Kawada.
I'll be looking for a new car this fall ... this might be it.
Looking at the 2nd test session the car looked outstanding. Wish I was there to know track conditions and tires used but still ... it looked great ! (good driving too)
#113
Tech Regular
#114
Tech Adept
Ciao jag88, if you refer to the front rear and rear rear hinge pin mount your consideration is not correctly, the piece is hold in position by 1 screw, but the mount is equipted with a pin that fit into the chassy, so the anchoring point are 2 and trust me no problem with hard crash !!!!!!!
#116
Ciao jag88, if you refer to the front rear and rear rear hinge pin mount your consideration is not correctly, the piece is hold in position by 1 screw, but the mount is equipted with a pin that fit into the chassy, so the anchoring point are 2 and trust me no problem with hard crash !!!!!!!
Thanks for the info !
I like the looks of the car. I hope FG Supply can bring it to market in the US.
#117
try for first time STX on asphalt track, put down with indoor setup, with SOREX 36, but track isn't in good condition and it was cold, 7-8°c
not bad, easy to drive, there is work on the setup and try at least 15°C.
finally, it seems that arrives the summer season and we will do a lot of tests!
not bad, easy to drive, there is work on the setup and try at least 15°C.
finally, it seems that arrives the summer season and we will do a lot of tests!
#118
Are DCJ's available for this car ?
Thanks.
Edit: after looking at the manual it looks like the kit comes with dcj's (?)
.
Thanks.
Edit: after looking at the manual it looks like the kit comes with dcj's (?)
.
Last edited by jag88; 04-11-2013 at 08:23 PM.
#119
Tech Adept
#120