Originally Posted by NolanP
(Post 11158724)
Yeah Fred FDR for the On-Road nats to make the A-main with my cars was at 3.12 in 17.5 and 3.64 in 13.5. But that was a huge track.
Just curious what spurs to run since HB doesn't make em super small. I was told an Xray spur will carry over which would turn out nicely. |
TCXX eManual
I scanned my manual into a PDF for those who would like to know what parts transfer over and which spares to order but it's too large to attach here so if you would like a copy please send an email to [email protected].
|
Originally Posted by Fred Hubbard
(Post 11158740)
Originally Posted by NolanP
(Post 11158724)
Yeah Fred FDR for the On-Road nats to make the A-main with my cars was at 3.12 in 17.5 and 3.64 in 13.5. But that was a huge track.
Just curious what spurs to run since HB doesn't make em super small. I was told an Xray spur will carry over which would turn out nicely. |
Originally Posted by Fred Hubbard
(Post 11158750)
... if you would like a copy please send an email to [email protected].
To see the manual just click on this link --> TCXX PDF Manual. |
At the Reedy I finished 3rd in the B-Main (my fault) running a Team Powers Plutonium 17.5 at 4.1. The straight at Nor-Cal is approx. 135'. Hopefully that gets you some data to work with.
Art |
Originally Posted by wwddww34
(Post 11158997)
Fred, thank you for sending the PDF so quickly. I saved the TCXX PDF manual to my www.box.com account so that anybody could upload the manual immediately.
To see the manual just click on this link --> TCXX PDF Manual. |
Fred Thanks again. wwddww34 thank you as well for which spurs I can put on the car. I'm pumped and can't wait to get my hands on the new car.
|
I run X-ray spurs on my TCX.
|
Does the tcxx come with steel front shafts? It looks like in the picture that the rear are steel.
|
Originally Posted by Jamison R
(Post 11160528)
Does the tcxx come with steel front shafts? It looks like in the picture that the rear are steel.
|
Originally Posted by NolanP
(Post 11160641)
Yeah it lists the steel in the rear and aluminum in the front. I know on the xray the steel is up front and aluminum is rear. I guess we will have to wait and see. I should have the double joint driveshafts coming too though.
|
Originally Posted by Fred Hubbard
(Post 11163647)
If you do/don't run DCJ's run the aluminum drive shafts in the rear.
Fred do you have any base setup's for carpet yet? |
Originally Posted by NolanP
(Post 11163677)
I do have the DCJ's on order too. So if i understand that correctly. If I do run the DCJ's I should run the aluminum drive shafts in the rear?
Fred do you have any base setup's for carpet yet? |
Originally Posted by Fred Hubbard
(Post 11163981)
Either way, yep so always run them in the rear. Not yet, I'm working on it.
|
I raced the tcx through it's evolution and now I'm super amped about the new chassis! Preordered from speedtech rc; hopefully they make their first week of September shipping date. The purple will ride again this winter at Richfield Raceway!!
|
All times are GMT -7. It is currently 07:53 PM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.