Ofna DM-1 Spec Electric 1/8 Gt OnRoad
#106
I'm using a center diff, so that's how I got the 44T to work. I also have a 40T that I can fit, which will allow me to run a 26T for pinion.
I'm using the savox servo, high speed.
I'm using the savox servo, high speed.
#107
Tech Adept
So for anyone's information ...do not buy this particular servo....does not fit this DM-1 Spec E car. Thanks,Huck
#108
It's the 1258
#109
Tech Adept
#110
Tech Adept
Can someone measure the hub diameter (in thousandths .000..)where the bore of the spur gear goes onto the gear holder on the DM-1 Spec e. Trying to figure out what's easier to machine,the bore of the spurs to make them larger or to machine the threaded portion of the gear holder?......I am guessing the bore of the smaller spurs gears(44,45,46,). I need a size(O.D.) where the bore of the spur gear mounts and is fastened with the large nut. Thanks,Huck
Last edited by Huck50; 01-23-2012 at 06:56 PM.
#111
Tech Adept
Just looking to see how many people are running an external BEC to run their high torque servo?. I am told I will need one to run my Savox SC-1256TG servo. Is the external BEC mandatory with this servo,as I read it draws 5.0 amps and my Castle ESC only puts out 5.5 volts,not sure of how many amps it puts out or can I get away with using possibly a lower torque/speed servo that doesn't draw so much juice,that way not needing the external BEC at all! I only use the car (Ofna DM-1 Spec E) for speed runs. Please recommend which powered servo if that's the case. Thanks,Huck
#112
Tech Regular
Just looking to see how many people are running an external BEC to run their high torque servo?. I am told I will need one to run my Savox SC-1256TG servo. Is the external BEC mandatory with this servo,as I read it draws 5.0 amps and my Castle ESC only puts out 5.5 volts,not sure of how many amps it puts out or can I get away with using possibly a lower torque/speed servo that doesn't draw so much juice,that way not needing the external BEC at all! I only use the car (Ofna DM-1 Spec E) for speed runs. Please recommend which powered servo if that's the case. Thanks,Huck
#113
Tech Adept
#114
Tech Rookie
Hello All:
I just recently purchase the DM1E and very happy with the car. The only thing I am not too thrill is the Mclaren Body that came with the car. I personally think the Body looks very cartoonish and want to replace the body.
I have 2 body in my mind that I would like to get but need to know whether it will fit on the DM1E. I have an eye on the HPI Toyota GT1 body, and Kyosho Aston Martin Body that I really like. They looks very good and would like to know whether it will fit on the DM1E? Please advise whether there will need any major modification?
Thanks very much in advance!
I just recently purchase the DM1E and very happy with the car. The only thing I am not too thrill is the Mclaren Body that came with the car. I personally think the Body looks very cartoonish and want to replace the body.
I have 2 body in my mind that I would like to get but need to know whether it will fit on the DM1E. I have an eye on the HPI Toyota GT1 body, and Kyosho Aston Martin Body that I really like. They looks very good and would like to know whether it will fit on the DM1E? Please advise whether there will need any major modification?
Thanks very much in advance!
#115
Tech Adept
Hello All:
I just recently purchase the DM1E and very happy with the car. The only thing I am not too thrill is the Mclaren Body that came with the car. I personally think the Body looks very cartoonish and want to replace the body.
I have 2 body in my mind that I would like to get but need to know whether it will fit on the DM1E. I have an eye on the HPI Toyota GT1 body, and Kyosho Aston Martin Body that I really like. They looks very good and would like to know whether it will fit on the DM1E? Please advise whether there will need any major modification?
Thanks very much in advance!
I just recently purchase the DM1E and very happy with the car. The only thing I am not too thrill is the Mclaren Body that came with the car. I personally think the Body looks very cartoonish and want to replace the body.
I have 2 body in my mind that I would like to get but need to know whether it will fit on the DM1E. I have an eye on the HPI Toyota GT1 body, and Kyosho Aston Martin Body that I really like. They looks very good and would like to know whether it will fit on the DM1E? Please advise whether there will need any major modification?
Thanks very much in advance!
What are you running for power? What servo? Thanks,Huck
Last edited by Huck50; 01-31-2012 at 04:43 AM.
#116
Tech Rookie
I am running MMM 2650KV.
As for the servo, I am using Traxxas Servo which is the same one that is on my 4x4 Slash. I feel it is adequate enough.
As for the servo, I am using Traxxas Servo which is the same one that is on my 4x4 Slash. I feel it is adequate enough.
#117
Tech Rookie
Anyone know where I can get one of these that's in stock?
#118
Tech Adept
motor size
does anyone know if a 4082 or 4088 motor will fit in this chassis?
thank you!
thank you!
#119
Tech Initiate
A Main Hobbies - out of stock (I back ordered mine and it was available within a week).
Nitro House - out of stock
Tower Hobbies - out of stock
Stormer Hobbies - out of stock (But they are showing a really good price now! $234.95)
Looks like IGT Hobbies has them (w/ free shipping) - http://www.igthobbies.com/OFNA-OFN34...IT_p_1819.html
Nitro House - out of stock
Tower Hobbies - out of stock
Stormer Hobbies - out of stock (But they are showing a really good price now! $234.95)
Looks like IGT Hobbies has them (w/ free shipping) - http://www.igthobbies.com/OFNA-OFN34...IT_p_1819.html
#120
Tech Rookie
[QUOTE=ml8163;10262125]A Main Hobbies - out of stock (I back ordered mine and it was available within a week).
Nitro House - out of stock
Tower Hobbies - out of stock
Stormer Hobbies - out of stock (But they are showing a really good price now! $234.95)
This is what I found with my googlefu that everyone is out, not even ofna had em for sale, I want to build one that will kick the living stuff out of a XO-1. So guys what motor combo will help me do this? I was thinking tekin rx8 combo say 2000kv. Savox 1257tg servo and my 3300t receiver.
Nitro House - out of stock
Tower Hobbies - out of stock
Stormer Hobbies - out of stock (But they are showing a really good price now! $234.95)
This is what I found with my googlefu that everyone is out, not even ofna had em for sale, I want to build one that will kick the living stuff out of a XO-1. So guys what motor combo will help me do this? I was thinking tekin rx8 combo say 2000kv. Savox 1257tg servo and my 3300t receiver.