Charger/Charging question
#2
Tech Elite
iTrader: (9)
Depends on the type of racing you do. If you run 12th scale 30 is over kill. If you are running strait TC 6 cell packs than 30 is better. But I would be more concerned about charge rate than discharge rate. I can make a 80amp discharger if a I want but I can not built my own charger. So if you are serious about racing than I would look at chargers that at least go uyp to 6amp charge rate.
Hope this helps,
Stephen <><
Hope this helps,
Stephen <><
#3
Originally posted by Mr. Shookie
Depends on the type of racing you do. If you run 12th scale 30 is over kill. If you are running strait TC 6 cell packs than 30 is better. But I would be more concerned about charge rate than discharge rate. I can make a 80amp discharger if a I want but I can not built my own charger. So if you are serious about racing than I would look at chargers that at least go uyp to 6amp charge rate.
Hope this helps,
Stephen <><
Depends on the type of racing you do. If you run 12th scale 30 is over kill. If you are running strait TC 6 cell packs than 30 is better. But I would be more concerned about charge rate than discharge rate. I can make a 80amp discharger if a I want but I can not built my own charger. So if you are serious about racing than I would look at chargers that at least go uyp to 6amp charge rate.
Hope this helps,
Stephen <><
So, TC discharge rate sould be 30amps and 1/12 should be 20amps?? Or is that still overkill for 1/12?