3 racing new F1
#3496
Tech Adept
iTrader: (5)
We have a few conversion kits back in stock and up on the website.
Going forward I have chosen not to make another production run. I will still continue to have replacement chassis and top decks but they are not on the site. If you need a replacement, PM me on RCtech or email me through my website and I can take care of you.
Thanks,
Troy Mckune
Going forward I have chosen not to make another production run. I will still continue to have replacement chassis and top decks but they are not on the site. If you need a replacement, PM me on RCtech or email me through my website and I can take care of you.
Thanks,
Troy Mckune
#3497
Anyone got a good starting set-up for a bumpy parking lot track?
#3499
Tech Apprentice
I refer to PIT 0561, PIT 0563, and PIT 0565 which are so far the best tires that I have tried (except for foam tires of course).
Last edited by Zedsispeho; 08-30-2012 at 10:45 AM.
#3501
you could run f104 front knuckles and F104 front rims with the 571 but then you would be narrow. Ride front f104 rims with HPI fronts, my setup, get width back.
Probably best is HPI med rear HPI soft or medium front. That's what I have. I am hoping to have my car done for sun at nor-cal
#3502
Tech Apprentice
571/572 are best BUT they don't fit on any FGX rims, F104 only
you could run f104 front knuckles and F104 front rims with the 571 but then you would be narrow. Ride front f104 rims with HPI fronts, my setup, get width back.
Probably best is HPI med rear HPI soft or medium front. That's what I have. I am hoping to have my car done for sun at nor-cal
you could run f104 front knuckles and F104 front rims with the 571 but then you would be narrow. Ride front f104 rims with HPI fronts, my setup, get width back.
Probably best is HPI med rear HPI soft or medium front. That's what I have. I am hoping to have my car done for sun at nor-cal
- PIT when temperature is low
- HPI Med rear / Soft front when temperature goes up
But I don't know if he was talking about PIT for F104 or PIT Grooved tires.
#3503
hello!
what body can be used for FGX
this one is ok ?
http://www.mcallisterracing.com/index_files/Page504.htm
thanks
what body can be used for FGX
this one is ok ?
http://www.mcallisterracing.com/index_files/Page504.htm
thanks
#3504
571/572 are best BUT they don't fit on any FGX rims, F104 only
you could run f104 front knuckles and F104 front rims with the 571 but then you would be narrow. Ride front f104 rims with HPI fronts, my setup, get width back.
Probably best is HPI med rear HPI soft or medium front. That's what I have. I am hoping to have my car done for sun at nor-cal
you could run f104 front knuckles and F104 front rims with the 571 but then you would be narrow. Ride front f104 rims with HPI fronts, my setup, get width back.
Probably best is HPI med rear HPI soft or medium front. That's what I have. I am hoping to have my car done for sun at nor-cal
I was referring to the grooved tires. I liked the med/med HPI or even the RIDE med rears are also very good.
#3506
Ready for tomorrow.
#3507
#3509
Tech Apprentice
However, be careful with F201 springs. They are a bit longer than the 3racing ones.
#3510
Tech Champion
iTrader: (6)
571/572 are best BUT they don't fit on any FGX rims, F104 only
you could run f104 front knuckles and F104 front rims with the 571 but then you would be narrow. Ride front f104 rims with HPI fronts, my setup, get width back.
Probably best is HPI med rear HPI soft or medium front. That's what I have. I am hoping to have my car done for sun at nor-cal
you could run f104 front knuckles and F104 front rims with the 571 but then you would be narrow. Ride front f104 rims with HPI fronts, my setup, get width back.
Probably best is HPI med rear HPI soft or medium front. That's what I have. I am hoping to have my car done for sun at nor-cal