Barracuda from Alex racing
#3436
R/C Tech Elite Member
iTrader: (47)
Re: Center One way or not?
Originally posted by Maj. Teeth
Ok, a quick question for you guys. My kit came with the center one way as well as the stock shaft. My question is, should I install the center one way as oppose to the stock? what are the benefits of this?
Dan
Ok, a quick question for you guys. My kit came with the center one way as well as the stock shaft. My question is, should I install the center one way as oppose to the stock? what are the benefits of this?
Dan
#3437
Wow! if thats the case, I'd definately want to install and try it.
I just built the diff with the ceramic balls and thrust balls that came along with it and it is soooooooooooooooo smooth. Now all I got to do is go down to Speedtech RC and buy another input gear because I broke one trying to clamp it with my needlenose like the instruction said. Question is, how the heck do you insert that through the second bearing? since there aren't really room to clamp it to begin with. The picture looks like the needlenose clamps after the 1st bearing but in reality, there aren't any room so I had to clamp it from behind the 1st bearing. The first one went in ok, but the second one snapped. Sucks!
Dan
I just built the diff with the ceramic balls and thrust balls that came along with it and it is soooooooooooooooo smooth. Now all I got to do is go down to Speedtech RC and buy another input gear because I broke one trying to clamp it with my needlenose like the instruction said. Question is, how the heck do you insert that through the second bearing? since there aren't really room to clamp it to begin with. The picture looks like the needlenose clamps after the 1st bearing but in reality, there aren't any room so I had to clamp it from behind the 1st bearing. The first one went in ok, but the second one snapped. Sucks!
Dan
#3440
Originally posted by Randman
I used really long thin pliers to do the second bearing. Check your PM though.
I used really long thin pliers to do the second bearing. Check your PM though.
Dan
#3441
is there any need to add ball diff grease if you are using ceramic bearings?
#3444
RM, so your Pinky will be your main car then? Sounds like your not going to run your Web Special? Or is it saved for brushless.
#3445
R/C Tech Elite Member
iTrader: (47)
The pink car is going to be brushless, it will be my main car. The web special will be saved mainly for stock racing, which I'll do at big events, and I'll switch out the pink car to modified for those events. Just want to keep my web special as new as I can.
#3449
Regional Moderator
Originally posted by Randman
And also, my Blue R2 has been sold. Dave has 1 more car he can add to his collection
And also, my Blue R2 has been sold. Dave has 1 more car he can add to his collection
your not talking about dave on the other side of the pond are you