BOLISARIO

iTrader: (57)

Nice pics fellas, keep 'em coming!

I'm still waiting on Tower to receive some stock so I can use my membership discount then I can try out some onroad racing(it's been a looong time, 2003 Crystal Park).

I have a spare Tekin 2050 to use, but you guys are all using 2200 and 2650 motors at Corona. Man, my set up is still too slow.

Do you fellas have any set-ups(tires, gearing too) I can use for Corona?

Any other tracks I can practice at to get ready for Corona other than WCRC?

snrscion

iTrader: (21)

I am gear at 14t and I don't know what speed I am hitting but it plenty fast for any track around here. I am using 4s 5000mah.

Sorry my website is a work in progress please PM me for prices thanks

Steve

markw

iTrader: (4)

With 4S and a 15/48 spur my DM1 spec hits 37 mph, and that drops down to about 35mph after it's been running for awhile. This was with a bushnell radar gun. I was going to try a 16T today but got busy racing 17.5 spec.

kman16jr

iTrader: (56)

Here guys,here is my buddy junior hitting 119mph in short distance with his custom electric dm1.http://www.youtube.com/watch?v=aQ_LW...e=mfu_in_order

Justpassedu

iTrader: (118)

thanks . The Tekin 2050 is prob. a bit better bc its sensored and you'll get a nice smooth start , just gear it up a lil bit and watch temps for some more speed. I already have a 2200v & 2650Kv so i'll be using one of those.

charlie_b

iTrader: (1)

+ YouTube Video

Check out Hobbytown Corona! Plenty of room to play!

Potoczak

iTrader: (120)

Looks llike a really nice track, wish i lived on the west coast. Hey what kind of speedo/motor/battery combo's are you guys running.

charlie_b

iTrader: (1)

I have a 6.5 Novak at the moment. Im waiting on my 2200 Cirtix From Speedpassion. The rest of the guys have a 2650kv. ALl of us are running 4s Lipos.

BOLISARIO

iTrader: (57)

Got any set up tips that you can share?

Best GT tires for Corona?

What spec servos are recommended for 1/8 GT? I'm sure you don't need no high powered, mega torque servos like offroad.

I think I will just settle with 2050 for now and just run at the back of the field behind you more experienced ,faster guys.

charlie_b

iTrader: (1)

I believe the ones i borrowed from Dave were BMt's. 20 up front, 10's in the rear. I ran my car Stock with the stock springs. I think they may be a tad soft, but drivable. I ran 5mm droop front and back and was too much still. I will be running 6.5mm in front and 6mm droop in the rear at Corona. I will also test the Impanema 50 shores and if i get them in the mail in time, the Sweep GT's. It will all be a test session for me, but the car is fantastic to begin with. If non of my tires come in, i will test the Ofna Slicks. I heard they worked well at Corona too.

omalley72

iTrader: (18)

Selling mine. It's just not for me...

http://www.rctech.net/forum/r-c-item...fna-gtp2e.html

Potoczak

iTrader: (120)

Hey guys, what's the lowest rear ride height you can set the car to? I am getting 11.5 mm with the shock collars all the way up. Does this sound about right. The front I can set alot lower.

omalley72

iTrader: (18)

what weight are you guys running in the front shocks? I'm getting a pretty good nose dive on braking. Also, did anyone have a hard time getting the body to clear the front bumper?

snrscion

iTrader: (21)

That ride height sounds right.

Right now I am running 70 front with white springs, 50 rear with red springs.

Potoczak

iTrader: (120)

Yes I had to cut back some of the foam bumper so the body would fit correctly.