2010 "IIC" INTERNATIONAL INDOOR CHAMPIONSHIPS IN LAS VEGAS

Reply Subscribe

Thread Tools

Search this Thread

09-12-2010, 07:10 AM

#691

ElliotCanada

Tech Addict

Join Date: Oct 2005

Location: London Ontario Canada

Posts: 557

Trader Rating: 0

What Chassis was Brian Bodine running in WGT 13.5 and what chassis was Brian Wynn running in WGT 10.5?

09-12-2010, 07:37 AM

#692

hanulec

R/C Tech Elite Member

iTrader: (28)

Join Date: Sep 2007

Location: @ the post office

Posts: 10,278

Trader Rating: 28 (100%+)

Quote:

Originally Posted by Chris08527

just a question and don't wanna start a huge debate a simple yes or no from someone who raced . . .

in the limited ESC classes where you allowed to crank the timing on the can?

yes Chris - you could add physical timing to the can... and I found that the motors I owned didn't do that so well at the race, so in TC Stock I ended up running a Novak motor purchased from the hobby store. thanks again to Charlie for the help w/ the motors. the roll out that you needed to run with a Duo v1 or SP v3 was just too high to safely complete the weekend with the motor temps I was seeing.

09-12-2010, 07:52 AM

#693

Troy Mckune

Tech Master

iTrader: (51)

Join Date: Jan 2009

Location: Vancouver, WA

Posts: 1,800

Trader Rating: 51 (100%+)

Quote:

Originally Posted by ElliotCanada

What Chassis was Brian Bodine running in WGT 13.5 and what chassis was Brian Wynn running in WGT 10.5?

Both were running the new CRC chassis.

Troy

09-12-2010, 09:10 AM

#694

Coldn

Tech Adept

iTrader: (1)

Join Date: Jul 2008

Location: São Paulo, Brazil

Posts: 115

Trader Rating: 1 (100%+)

anybody have vídeos??

I really want to see the mod. and 17.5 finals.

09-12-2010, 09:55 AM

#695

goos

Tech Adept

Join Date: Mar 2010

Posts: 198

Trader Rating: 0

Quote:

Originally Posted by hanulec

What FDR:s where you running on duo1 motors?

09-12-2010, 09:59 AM

#696

haywood

Tech Elite

iTrader: (49)

Join Date: Dec 2008

Location: Minnesota

Posts: 2,877

Trader Rating: 49 (100%+)

17.5 SS

Was Hebert hurt by running a LRP in this class vs. the Tekins?

09-12-2010, 12:28 PM

#697

hanulec

R/C Tech Elite Member

iTrader: (28)

Join Date: Sep 2007

Location: @ the post office

Posts: 10,278

Trader Rating: 28 (100%+)

Quote:

Originally Posted by goos

What FDR:s where you running on duo1 motors?

Really low... sub 3 FDR. It was safer with a low 3 FDR but slower. Both configs were slower than a Novak Ballistic with a ton of timing and 3.9 FDR.. and the Novak came off much cooler (150 degrees).

09-12-2010, 01:25 PM

#698

Brian H

Tech Initiate

iTrader: (3)

Join Date: Aug 2010

Posts: 36

Trader Rating: 3 (100%+)

Quote:

Originally Posted by hanulec

Really low... sub 3 FDR. It was safer with a low 3 FDR but slower. Both configs were slower than a Novak Ballistic with a ton of timing and 3.9 FDR.. and the Novak came off much cooler (150 degrees).

r u gonna post your 17.5 setup on xrays site from iic??

09-12-2010, 02:43 PM

#699

RCFREAK

Tech Elite

iTrader: (20)

Join Date: Sep 2001

Location: MEMBER OF THE "MWC" Mimi Wong Clan

Posts: 2,442

Trader Rating: 20 (100%+)

2010 iiC MOD A- Main Video!!!

http://www.youtube.com/watch?v=aDeWA...9698e255eb9876

09-12-2010, 02:56 PM

#700

sg1

Tech Elite

iTrader: (79)

Join Date: Aug 2004

Location: Ohio

Posts: 3,262

Trader Rating: 79 (100%+)

I noticed there was only 1 guy in 17.5 1/12 that was able to do 10.3 lap times.

What motor did he run?

09-12-2010, 03:45 PM

#701

xray09ACT

Tech Regular

iTrader: (7)

Join Date: Aug 2009

Posts: 280

Trader Rating: 7 (100%+)

That was HOT!!

09-12-2010, 04:34 PM

#702

brians11

Tech Master

iTrader: (40)

Join Date: Jun 2003

Location: Tulsa, Oklahoma

Posts: 1,866

Trader Rating: 40 (100%+)

Quote:

Originally Posted by goos

What FDR:s where you running on duo1 motors?

For reference, I ended up with a 3.64 FDR on a Duo2 w/ 15 deg timing on the motor for sedan, qualified and finished 3rd, so I wouldn't say the Duo's were not capable of going fast in this class

09-12-2010, 05:08 PM

#703

M3Armand

Tech Regular

Join Date: Aug 2010

Location: Boston, MA

Posts: 263

Trader Rating: 0

Quote:

Originally Posted by RCFREAK

2010 iiC MOD A- Main Video!!!

http://www.youtube.com/watch?v=aDeWA...9698e255eb9876

Looks like Volker got hacked by Hara, but I coudn't really tell from the video since there was a person blocking the shot.

09-12-2010, 05:23 PM

#704

RCFREAK

Tech Elite

iTrader: (20)

Join Date: Sep 2001

Location: MEMBER OF THE "MWC" Mimi Wong Clan

Posts: 2,442

Trader Rating: 20 (100%+)

Quote:

Originally Posted by M3Armand

Looks like Volker got hacked by Hara, but I coudn't really tell from the video since there was a person blocking the shot.

Actually Volker tapped the top of the carousel/ roulette table and was on the outside, Hara had the line the whole time..

Scotty also announced that he tapped!!

Gotta give props to my girl for the good video coverage...I had to marshall at the chicane, in between the Tekin signs... man i was glad no one needed to be marshalled.