MoonTrap

Hiya

I am racing the MI2EC in 540 class (silver can) and was wondering which is it better to go with as regards to spur sizes.. Is it better to run a bigger spur or a smaller spur, still keeping within the same rollout though.

Thanks

Alex Lopez

It really depends on the size of the track, but for the most part we run a 118 spur.

mini-dub

iTrader: (16)

Mmm gotta love the grey bulkheads . Glad to see so many people looking forward to our new kit, it's going to be an amazing car.

Here's what I've been doing in my spare time with no home track .

http://www.youtube.com/watch?v=9uQ4V...elated&search=

TeamButter

iTrader: (3)

Shouldn't you be blazing down a snowy hill somewhere??

LOL!!!! WHat's up Mini? Chopper skillz looking dialed!

mini-dub

iTrader: (16)

Lol my body has been a little screwed up so I havent been skiing for about a week and a half. Hopefully when I get back on the hill tomorrow everything works well again!

Thanks . That flying was a little mild, I don't like to fly over parking lots .

TeamButter

iTrader: (3)

What's your next race mini? Carpet Nats? Reedy?

wyd

iTrader: (51)

Damn that is pretty good. The Trex is a killer heli and by the look I think you have the SE version. I fly a little with the hobbyshop heli but not even close to what you are doing. I just never fly enough to actually get good.

aus jd 2703

iTrader: (5)

hey guys
can u run one riser plate ie under rear diff and no riser under the opposite diff? also what about spacers on the motor mounts and layshaft mounts? cheers

wyd

iTrader: (51)

Yes you can run the diffs with one up and one down. I run my rear diff with the riser plate and the front diff without.

aus jd 2703

iTrader: (5)

wont it cause the top deck to tilt? and not to mention tweak?
im a noob so please explain lol in dumb mans terms

Jon Kerr

iTrader: (17)

Just use the spacers under the top deck on the lay shaft and motor mounts to get the top deck up to the proper height and then put two 2mm shims under the top deck on top of the front bulkhead. This will keep it from bending the top deck. Also make sure you use the black spacer in the left steering bell crank. If you ran the car with both diff risers out, you will have taken that out.

mini-dub

iTrader: (16)

Not sure, Reedy, maybe.

Fred Perkins

iTrader: (264)

I ran some stock Foam sedan last night at Horsham. Voodoo/EA power was great! Thanks to Mike Ivy for cutting my comms last night! I qualified 4th and finished 4th made a few mistakes ran a 23 in 5:00 I know the car had a 24 in it. My MI2ec was definaly on rails last night!

Good Luck to all at snowbirds this week!

wyd

iTrader: (51)

Fred keep that EC. Makes a killer spare car.

SRW141

iTrader: (4)

I raced at our indoor asphalt track Frederick, MD last night. Qualified 10th in the "A" and finished 3rd. We had some really close racing last night. It was great running the Mi2EC after taking 5 months off from sedan to run 1/12th scale. Voodoo/Full Throttle made the Schuie rip all day.