Xray T1
#7216
Tech Elite
Does anyone mind Hooking up a asphalt setup? I have a Point series with saturday and its the first time im trying my Xray on asphalt. email [email protected] Please put your Rctech name in subject.
Thanks
Thanks
#7217
Tech Elite
iTrader: (10)
Ray all I had to do was shave a very, very tiny amount of the front left arm mount to clear the battery post. Everything else was perfectly fine. I love how it handles. It still has plenty of room for electronics too...maybe even more than the stock batts in the back..
Goop has the .350" forward and even with the KO super-micro reciever and a GT7 his stuff is a very tight fit.
You have to mess with the length of your jumper wire and batt config. for the staggered but it's very nice
Goop has the .350" forward and even with the KO super-micro reciever and a GT7 his stuff is a very tight fit.
You have to mess with the length of your jumper wire and batt config. for the staggered but it's very nice
#7218
Brian....You say you love how it handles....are you up to par with your tc3 as far as lap times?
#7219
Hi all. i have recently switched to X-ray from an Assassin. X-ray is easily the best car I have ever owened, MUCH better then the Assassin. Anyway, here is my FK, it has been anodized gold for looks.
#7220
Rear bulkhead
#7221
Front
#7222
Hmm, sorry, didn't seem to work. Here are the links then:
Rear Bulkhead:
http://www.rctech.net/forum/attachme...&postid=914946
Front:
http://www.rctech.net/forum/attachme...&postid=914947
Rear again:
http://www.rctech.net/forum/attachme...&postid=914950
John
Rear Bulkhead:
http://www.rctech.net/forum/attachme...&postid=914946
Front:
http://www.rctech.net/forum/attachme...&postid=914947
Rear again:
http://www.rctech.net/forum/attachme...&postid=914950
John
#7223
Tech Regular
Originally posted by Johnny J
Hmm, sorry, didn't seem to work. Here are the links then:
Rear Bulkhead:
http://www.rctech.net/forum/attachme...&postid=914946
Front:
http://www.rctech.net/forum/attachme...&postid=914947
Rear again:
http://www.rctech.net/forum/attachme...&postid=914950
John
Hmm, sorry, didn't seem to work. Here are the links then:
Rear Bulkhead:
http://www.rctech.net/forum/attachme...&postid=914946
Front:
http://www.rctech.net/forum/attachme...&postid=914947
Rear again:
http://www.rctech.net/forum/attachme...&postid=914950
John
#7224
The gold is beautiful. Did you know that BMI Racing has gold carbon graphite for the Xray to match your bulkheads?
#7226
Sweet!
That gold is the bomb! I think I am gonna get mine done blue baby! Nice job!
#7228
Hi
I have an Xray T1 with Novak Brushless and want to replace this with a 19turn motor and ESC. Whats a really good motor and speed controller? I dont need top of the range controller
Cheers
I have an Xray T1 with Novak Brushless and want to replace this with a 19turn motor and ESC. Whats a really good motor and speed controller? I dont need top of the range controller
Cheers
#7229
i'm running an integy/matrix 19S modified quadmag.....
very good motor, try a final ratio between 5.5 and 6.0 for open asphalt tracks....
very good motor, try a final ratio between 5.5 and 6.0 for open asphalt tracks....
#7230
Tech Regular
iTrader: (3)
Spur Gears
Hey guys, I'm wondering what aftermarket spur gears work with my FK? I had some Robinson racing ones sitting around but the holes don't line up with the layshaft correctly. Do Kimbrough work? What other brands? I'd like to stay 48 pitch simply so because all my other cars are 48 and I've got tons of pinions....